UNSOLVED

vsaxena

updated

16 years ago

V

vsaxena

34 Posts

0

63111

December 10th, 2010 17:00

Dell Precision T5500/T7500 Dual CPU: Do the frequencies have to match exactly?

I just purchased a T5500 with Xeon E5640 CPU. These systems support dual CPU configurations.

Can I use the E5620 CPU in the second slot?

 

http://en.wikipedia.org/wiki/List_of_Intel_Xeon_microprocessors#.22Gulftown.22_.2832_nm.29

 

These two processors just differ in the multiplier used internally for the system clock and have exactly the same external specs. I am hoping that I can plunk the half priced E5620 as the second core on this system. Can someone from Dell Tech Support verify this?

  • vsaxena

    34 Posts

    1685

    0

    Posted December 10th, 2010 21:00

    I did some research on this and found the following.

     

    Page 29 of the spec sheet for the 5600 series

    http://www.intel.com/Assets/PDF/datasheet/323369.pdf

     

    Based on the above requirements the following comparison suggests that E5620 and E5640 should be mutually compatible.

    http://ark.intel.com/Compare.aspx?ids=47923,47925

     

    The question of course is whether the BIOS on the Dell Boards will allow them. Since the individual CPUs these days have on-chip voltage and frequency scaling, what really matters is the external interface which is identical in both. All that changes is the internal multiplier.

     

    Only Dell BIOS people can confirm this.

     

     

  • vsaxena

    34 Posts

    1685

    0

    Posted December 29th, 2010 15:00

    I have a follow-up question regarding the Precision Motherboards

    The T5500/T7500 use the Intel 5520 chipset which supports 36 PCI-lanes

    http://ark.intel.com/chipset.aspx?familyID=32423

    When I look at the specifications of the motherboard it says it has 4x16 physical lanes, 2 @ x16 and 2 @x8. This means a total of 48 lanes.

    <ADMIN NOTE: Broken link has been removed from this post by Dell>

    So there is a disconnect between the number of lanes offered and the number supported by the chip-set.

    Do the motherboards have additional resources to handle the extra 12 lanes, or do the lanes dedicated to x16 slots get reassigned if the x8 slots are also occupied?

    I want to understand the capabilities of the system better in order to find the right balance of resources (Graphic Display Cards, GPUs cards, and Storage Cards).

    I also have the same question regarding the T3500 which is X58 based (36 lanes)

    http://ark.intel.com/chipset.aspx?familyID=36776

    The motherboard diagram is showing 2x16 and 2x4 for 40 lanes.

    The specifications say 2x16 and 2x8 which is again 48 lanes.

     

    The tech-specs talk about controlling the lane assignment (port bifurcation) either using hardware straps or via BIOS.

    http://www.intel.com/Assets/PDF/datasheet/320838.pdf (page 33 onwards)