
UNSOLVED
Dell Dimension 9200 with 8800 GTX, power supply problems
As of today you can outfit the Dimension 9200 series with a DirectX 10 video card, the Geforce 8800 GTX. This is concerning the Dutch Dell site.
My question is, the standard power supply of a Dimension 9200 is 375 Watt, isn't this a bit poor for such kind of card? I read on the Internet that a 8800 GTX in combination with a dual core 2 is needing an output of around 750 watt. Can anybody explain if the suplly of 375 watt is sufficient.
Thanks,
Jeroen
Responses (3)
Solutions (0)
- I have just installed the card in my 9200 and so far no problems after 9hr of gaming. From what I gathered here and on the net, you need to make sure you have 2 free 12v rails with a total of 30amps between them. The first 12v rail is easy as it is attached to your current card, the second connector is a 4pin molex connection that you can buy(if you buy the card retail, the adapter will most likely be included) a cable adapter that transforms it into a 6pin pci-e graphics adapter connector. My standard 375watt Dell PSU reported 12vA at 18amps and 12vB at 18amps so 36 > 30 and I installed it with optimism. I still plan on purchaseing a new PSU this year, but atleast this gives me some researching room. And yeah, I agree with the other poster that the title mislead me to beleive that someone was reporting a problem with the 9200 PSU + 8800 GTX combo.
- "My standard 375watt Dell PSU reported 12vA at 18amps and 12vB at 18amps so 36 > 30 "_____________________________________________________________________________You're a little bit off there, the total amperage cannot be tallied by adding the +12 volt rails, divide the total wattage provided on the +12 rails by 12 to get the amperage. The Dell 375w psu provides 360 watts to the +12 so is a total of 30 amps on the combined +12 volt rails.The pci express slot provides 6 amps of power to the card, the rest of what it needs comes from the pcie connector off the power supply, so as long as the motherboard and other components are only drawing 6 amps a total of 24 (18 from +12vb and 6 from+12va) can be provided to the video.

contrvlr
1359 Posts
223
0
Posted February 28th, 2007 20:00