
UNSOLVED
R
RacinJason73
5 Posts
0
7826
August 31st, 2006 03:00
Anyone running a nVidia 7800GS video card on a Dimension 8200?
Anyone running a nVidia 7800GS OC 256Mb AGP video card on a Dimension 8200?
I have searched and found a few threads of people considering this video card upgrade. However, I've not seen anyone posting that they've successfully made the upgrade to this card on a similar computer to mine. I have just received my second 7800GS card and the result is the same ... the computer will not post ... not even to BIOS. If anyone is running a nVidia 7800GS card, what's the secret to making it work? BFG tech mentioned a BIOS upgrade, but it appears I have the latest for the 8200 - version A09. Anyone have any ideas?
If it helps, here are the specs. on my Dell Dimension 8200
Processor: Intel Pentium IV 2.4Ghz (I believe it's the 533Mhz bus)
Memory: 1.25Ghz
Power: PC Power & Cooling 470W supply with 25A (if I recall correctly) on the +12v rail
BIOS: A09
O/S: Windows XP Home SP2
AGP slot: 4X
HD: 80Gb (2/3 full)
Help! I hate to send another one back and would much rather figure out how to make it work. Any thoughts of things to try? OR, any suggestions for an alternative video card which WILL work? Thanks in advance!
Responses (15)
Solutions (0)
- Interesting to say the lease. You have a good power supply, so no issue with that one. Where do you have the video power connector from the video card connected to on your system ? Is it is directly connected to the power supply itself ? See if you can change that to maybe a power connector located near the cdrw or dvd drive. Do not use the hard drive extra connector. Get back to us. Good luck
Dim 4400
2.6 Ghz 400 FSB
1 Gb 2100 DDR memory
Windows XP Home
17 inch 1703 FP monitor
XFX 7800 GS O/C AGP ( 91.31 driver ) This is my video card maker. Some say its OK, Good and some say its lousy. I'm happy with it
16x DVD-R
410 watt ( PcPower&Cooling )
PC-Cillon Internet SecurityMessage Edited by SR45 on 08-31-200603:42 PM
RacinJason73
5 Posts
493
0
Posted August 31st, 2006 18:00
Thanks for the in-depth response. I had previously done most of what you mention with exception to the driver cleaner, cab cleaner and hitting the power button once disconnected to fully disipate any remaining power in the system. I took the time to try again following your directions completely. Still, no dice. Same result upon hitting the power button after installing the 7800GS card. The CD & DVD drives power up, flash their lights and are in standby mode. The HD light flashes briefly and then the system comes to a halt. It does not post/initiate. It doesn't even make it to BIOS and doesn't send any signal to the monitor. Is it possible I have received two bad cards in a row from Newegg? I think that's highly unlikely. I'm seriously beginning to think my computer does not like the BFG 7800GS OC card. Should I venture trying another brand? eVGA prehaps? Or will it make no difference since they are similar in design (right?) and feature the same chipset? Should I back off and attempt a GeForce 6 series instead of 7 series? My original GeForce 3Ti took a dump. I'm currently using an eVGA 4400MX PCI card ... works as a temporary solution, but really stinks for gaming (way worse than the original - who would've thought!). My goal is to upgrade my system enough for now to play Oblivion. The next round of 'next gen' games will demand a new machine. Just trying to breathe a little more life into my Dell Dimension 8200.Anyone have any advice? Other ideas which may be causing an issue which won't allow my system to recognize the BFG 7800GS card? Thoughts?Again, Thanks in Advance!RacinJason73
5 Posts
493
0
Posted August 31st, 2006 19:00
Yeah, I thought about the extra power draw of connecting the video card in series with another powered component (they'd have the same voltage, but not necessarily getting full amperage to the video card). On my final attempt, I hooked the CD, DVD, 3.5 floppy and HD together on one lead from the PSU and the other lead out of the PSU was used solely for the video card to eliminate that concern. I'm not sure how and where the "PSU ends" are connected to the power source, but there are two leads coming out of the PSU case. Regardless, same result - nothing. I guess I could unplug the CD, DVD, and floppy and see if that makes a difference. Here are the specs. on my overpriced PSU ... http://www.pcpowercooling.com/products/viewproduct.php?show=S47D&view=techspecs ... but it was the best I could find to fit inside the case (without modifying for the PSU switch) having greater than 400W AND more than 20A on the +12v rail (mine has 26A) to meet/exceed BFGs requirements. I did find one other option - some 680W PSU for $250. WRONG!What about taking out other cards one at a time to see if there is some crazy initializing conflict? Is that possible? Is doing that worth my time?Right now, I don't know what else to do other than try a brand other than BFG or a video card that is not as "high caliber". I'm open to thoughts, suggestions, ideas, things to try, snyde comments and rude remarks. It's events like this that make me question my technical abilities. I'm not a computer genius, but I can fix things that most can't. This one is making me feel stupid, because it seems there are others with similar systems and have been able to make the leap to a better graphics card.- If you had onboard video before the new 7800 GS, make sure you disabled it under your BIOS.Also, the 7800 GS needs to be plugged into its own molex cable running off the PSU, and shouldn't be shared with the hard drive or other DVD drives, etc. Most cards can be plugged into a shared molex cable, but the 7800 GS requires ample amperage.Furthermore, can you hear the fans spinning on the 7800 GS when the computer doesn't POST? The 7800 GS has a large history of being DOA - dead on arrival. It is possible that the card you received is yet again - dead.
RacinJason73
5 Posts
493
0
Posted August 31st, 2006 19:00
No on-board video. BFG Tech had me look around in BIOS to disable on-board. The fan was running on both 7800GSs. Neither would post like the computer didn't recognize the 7800Gs was even there. ??? The first 7800GS was tried in another computer at a computer service store with the same result. We concluded #1 was DOA. I can't hardly believe #2 could be DOA as well. Yes, #2 was a different, new card (I put a small sharpie mark on #1 to ensure I didn't get it back).Good suggestions guys - THANKS! ... any more?Message Edited by RacinJason73 on 08-31-200603:58 PM
- Looks like a return again, and maybe another manufacture. That's if you want to go through the hassel again. Sorry for the troubles, but it should work. Trying different connectors and no worky, time to take a break and think this through. Good luck
- I'm running a 7800GS in my 8200 with no problems. When I got my card and tried to install it, I got the same black screen because I forgot to uninstall the NVstrap driver that comes with Rivatuner. After uninstalling that, things have been fine.I purchased my 7800 at ZipZoomFly.
Message Edited by thatsme on 08-31-200606:29 PM
Jason, with all your hard efforts looking into solving this ordeal, it does look like the card is dead. Although you exclaimed that you have no technical expertise, you have done all the required and correct steps into setting up and installing the card, as well as troubleshooting the relative and subsequent problem. Video cards shouldn't be this capricious everytime you install a new card; but because they're this way, you can at least return them for a new card. In your case, RMA the card as your efforts are exhausted. Maybe try a new brand - eVGA is highly reputable and reliable.
RacinJason73
5 Posts
161
0
Posted September 1st, 2006 00:00
All - THANKS! You're leading me toward what I feared ... another return.
Before doing so, do any of you think there is any chance this is a CPU speed issue. The video card requires faster than 700MHz (I'm way above that), but those responsing with successful installs are at or above 3GHz. Was there something different between the CPUs which might cause this? I'm not making that upgrade, but I'm curious. I think not, but maybe the rest of you know better.
I'll probably RMA it and request an eVGA card instead (it's even a little cheaper right now). Maybe this is a Newegg issue. I've always heard good things about them from others. Without turning this into a bash session, anyone have any bad Newegg experiences?
Thanks again!

SR45
2 Intern
•
12138 Posts
493
0
Posted August 31st, 2006 12:00
Don't know if you tried this, but give it another try using the following suggestions.........
Proper install of a video card: http://www.hardforum.com/showthread.php?t=965852
Download the most current driver, and have it placed on the desktop for later install. www.nvidia.com driver site, if it’s a nVidia card, or www.ati.com driver site, if it’s a ati card. ( Try not to use the video card driver from the cd that comes with the card, since they are some what out of date. )
Going from an ATI card to NVIDIA or vs. versa, one should uninstall the old driver first, from Add/Remove program, than use a driver cleaner, to get all the old driver code completely off the system. Use the driver cleaner twice.
http://www.drivercleaner.net/ Driver Cleaner Pro download site,
1. Turn off the system, unplug the power cord, and push in on the systems power button for about 5 seconds to discharge the system further.
2. Remove the old card, and install the new card, firmly. Attach if required, any power cable to the card, and to a power connector on your system. ( Some, not all, cards need a Molex Y power cable connected to the rear of the video card, and the other end to a power connector to get the video card to work )
3. Plug the power cable back in, and reboot the system. You may notice that the monitor screen is larger now. Not to worry if this happens.
4. Disable your anti virus software, and disconnect the modem.
5. Install the newer video card driver from the desktop, than if necessary; go into the Display Properties to reset the monitor resolution. You are almost done. Now restart the anti virus program, and connect the modem. ( It has been noted from time to time, that the anti virus program may cause problems with the install of some drivers, and some games, so its best to disable this during the driver install to eliminate that possibility )
Dim 4400
2.6 Ghz 400 FSB
1 Gb 2100 DDR memory
Windows XP Home
17 inch 1703 FP monitor
XFX 7800 GS O/C AGP ( 91.31 driver )
16x DVD-R
410 watt ( PcPower&Cooling )
PC-Cillon Internet Security
Message Edited by SR45 on 08-31-200609:13 AM