UNSOLVED

davbow

updated

18 years ago

D

davbow

67 Posts

0

11810

October 22nd, 2008 17:00

2x 8800GT on 630i motherboard, one GPU running 50% specs

I have run into an issue where the GPU in the lower PCI (I think the blue one) slot on my 630i is running at 50% of its rated speed.

 

1.  If I switch cards, it is the same slot that is running slow - so not card dependent. 

2.  I have tried 2 different 8800GTs and have the same issue.

 

I have completely unstalled video and nforce drivers, reinstalled.  Flashed both BIOS and ESA again.  

 

Check the speed with other 3rd party diagnostics and the utilities that actually display speed show the one card running 50%.

 

In the Nvidia Performance, one card is speed adjustable, the other is not (the card in the slot running 50% is not adjustable).

 

I tried to install one card, reboot, install drivers.  Turn off, install second card, reboot, install drivers.  No change.

 

Anyone else seeing this and does anyone have an idea as to what could be going on?  I have tried everything I can think of, and I am running out of ideas . . . 

 

When I run the F@H GPU client, one runs at ~5300 ppd, the slow one runs ~2600 ppd.

 

TIA

 

David

  • ElkWapiti

    513 Posts

    437

    0

    Posted October 22nd, 2008 17:00

    The two PCIe slots should provide the same performance.

     

    Do you have SLI turned on but you are running a dual card configuration?

     

    Or are you trying to run SLI and have the bridge connected but SLI is not turned on? 

  • davbow

    67 Posts

    437

    0

    Posted October 23rd, 2008 01:00

    SLI off, bridge connected
  • ElkWapiti

    513 Posts

    437

    0

    Posted October 23rd, 2008 01:00

    I assume that you have also tried it with the bridge disconnected, yes?

     

     

  • davbow

    67 Posts

    437

    0

    Posted October 23rd, 2008 13:00

    I would also like to find out if anyone else is seeing this behavior on the 630i so that I can confirm if it is an issue with my machine or the 630i in general.
  • davbow

    67 Posts

    437

    0

    Posted October 23rd, 2008 13:00

    If I install it in the suspect slot, w/o any other GPU cards, it runs at the slower speed.

     

    Which is why I am leaning toward a MB issue, but I do not have any idea how I am going to get Dell to believe me.  Last time I talked to them, they indicated that if the GPU displayed, even if it is running at a lower speed, then I was not eligible for replacment hardware.  I do not believe it is an issue specific to the GPU hardware since I have tried 4 different 8800GT cards with the same result.  Again, why I am leaning toward driver or MB issue.

  • ElkWapiti

    513 Posts

    437

    0

    Posted October 23rd, 2008 13:00

    What happens if you install only one GPU and you install it in the suspect slot?  Does it still run at half speed?

     

    I am beginning to suspect that this is just the way it is when the two cards are installed. I don't know why this might be however.

     

    Perhaps someone else with the same configuration will be willing to check. 

  • davbow

    67 Posts

    437

    0

    Posted October 23rd, 2008 13:00

    Thought so, but just to confirm, I removed the bridge, rebooted, and still have the same issue . . . not sure if I had tried that before . . .
  • 437

    0

    Posted October 23rd, 2008 13:00

    Davbow,

     

    I think it is a F@H systemic issue.  Here's another friend with a 720 with your same exact problem:

    http://forums.rampantspeculation.com/showthread.php?t=2370

     

    Have you tried writing in the Stanford forums regarding this issue?  Little help here, but may help to know others are having the same issues :(.

     

    Rafa.

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    437

    0

    Posted October 24th, 2008 11:00

    Davbow,

    Check the speed with other 3rd party diagnostics and the utilities that actually display speed show the one card running 50%.
    * I do not think this is a hardware issue. What software are you using to show the display speed? It sounds like the F@H GPU client is just showing what F@H is doing, not what the video card hardware can do.
    Message Edited by DELL-Chris M on 10-24-2008 07:45 AM


    DELL-Chris M (old account)

    #IWork4Dell