
UNSOLVED
Warranty Question
I spilled water on my motherboard and it was not covered by warranty, i have a new motherboard on order, my question is, if i install the new board in my Aurora ALX myself, will it void my warranty, or should i use dells recommended technician, whom i would have to pay for, and would not be covered if he breaks anything during the install, i have changed out cpu's in machines before, but not in one's that are liquid cooled.
Responses (5)
Solutions (0)
I spilled water on my motherboard and it was not covered by warranty, i have a new motherboard on order, my question is, if i install the new board in my Aurora ALX myself, will it void my warranty, or should i use dells recommended technician, whom i would have to pay for, and would not be covered if he breaks anything during the install, i have changed out cpu's in machines before, but not in one's that are liquid cooled.
Your warranty is still good for the rest of the system just not the motherboard. If you break the board installing it then you're out of luck but if it goes bad sometime down the road they will replace it. Anytime you buy parts for it just make sure you always buy from Dell so it will be covered. I think you get one year from date of purchase for the board and since it is a certified Dell part it will keep the rest of your warranty intact. If you have the extended warranty on your system, lets say 3 years then have them update your info for the new board so it will also have the extended warranty beyond the 1 year mark. keep your purchase number for the new board just to be safe. Do not ever throw it away.
But yeah if you break something installing it then thats on you and not Dell. If you feel you can not change it yourself then pay the extra cash and have a tech come out and do it. If you get a tech to install it and he breaks it then it is on him. He needs to replace it, not you or Dell. I would do it myself if I was you but only if you know how to. When you change it just take your time. Remember where everything goes. If need be right down the order for the connections. You can even take a picture of it and print it out for reference. It is really easy to do just don't rush it. Watch this video if you havn't yet. http://www.youtube.com/watch?v=pVFaOyenmiU
BTW, how in the world did you spill water on it? Did it go through the top vents? If so how do you know it did not damage something else? Did you try to dry it out like Tesla said?
Page 1: http://www.grynx.com/projects/salvage-your-device-after-liquid-spill/
Page 2: http://www.grynx.com/projects/salvage-your-device-after-liquid-spill/2/
Page 3: http://www.grynx.com/projects/salvage-your-device-after-liquid-spill/3/
One last thing. Get yourself a travel mug. The ones that are made for cars and are spill proof. That is what I use.
Sorry for late replies. You know if i had known all the hassle i would have to go through just to get a replacement part i would have played dumb and pretended i did not know what was going on, but i try to be honest about things, which apparently is not always the best route to go if you are dealing with Dell. I am thinking i will probably install motherboard myself after reading what these so called technicians have done to other peoples computers on this board, i have changed out my cpu on my old xps m1730 and found an excessive amount of thermal paste on the old unit, i know thats not how you install a cpu but apparently it's allowed when Dell does it. And when my machine first went down it was turned on and my youngest daughter spilled a vase of water on it, i tried turning it off as quickly as i could but damage was done by then i believe. I called tech support and they had me troubleshoot machine even though i told them what had happened, i was able to boot to bios for a couple of test runs but after that the board would not even power on, right now the only way i can get power to the board is if i press the test button on the power supply unit, but even then i get no image whatsoever on computer screen. I gave the machine 1 day to dry before calling support.
I'm just thinking it may have got into the PSU,hard drivers and who knows what else. I guess when you get the new board you will find out. Yeah I don't like to lie about stuff ether. Live and learn I guess. Good luck on getting it running again.
I sure hope not, the one thing that really concerns me is if the CPU is fried, those things don't come cheap, but likei said, the board gets power when i hit the test button on the PSU, i don't think my hard drives were affected, at least i hope not, but i will rebuild machine if i have to.

Tesla1856
10 Wizard
•
18086 Posts
•
71947 Points
281
0
Posted November 10th, 2010 19:00
Was the machine on when the water spilled on it?
Have you tried properly drying the board and resetting the CMOS (jumper or pull battery).
The forum has links to the Teardown Videos. As you can see, is just like a fanned unit. Just clean processor, apply thermal compound, and screw down the heatsink/pump unit.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.