
UNSOLVED
Systemventilator goes up to 4300 tpm when playing BF4
Hi guys,
Now I have some issues with the system ventilator. It goes sky high when playing BF4, didnt had this at all before a couple days back.
What can it be? On idle i have a rate of 1199 tpm what looks good for me..
Someone can help me to solve this problem...
Greetz,
Frank
Responses (6)
Solutions (0)
This is the hwmonitor-log the first temp 0 is almost twice as high temp 1 and temp 2 in idle mode?
Voltage 0 3.31 Volts [0xCF] (+3.3V)
Voltage 1 1.38 Volts [0xAC] (CPU VCORE)
Voltage 2 2.32 Volts [0x91] (VIN2)
Voltage 3 1.28 Volts [0x6D] (VIN3)
Voltage 4 3.78 Volts [0x5A] (+5V)
Voltage 5 16.19 Volts [0xB8] (+12V)
Voltage 6 3.36 Volts [0xD2] (VIN6)
Voltage 7 3.30 Volts [0xCE] (VSB3V)
Voltage 8 3.31 Volts [0xCF] (VBAT)
Temperature 0 59°C (138°F) [0x3B] (TMPIN0)
Temperature 1 34°C (93°F) [0x22] (TMPIN1)
Temperature 2 34°C (93°F) [0x22] (TMPIN2)
Fan 0 1184 RPM [0x4F3] (FANIN0)
Fan 1 3529 RPM [0x1A9] (FANIN1)
Fan 2 3529 RPM [0x1A9] (FANIN2)
Fan PWM 0 66 pc [0xA9] (CPU)
Fan PWM 1 66 pc [0xA9] (System Fan 1)
Fan PWM 2 66 pc [0xA9] (System Fan 2)I will upload another log when I'm playing BF4
This is when I played BF 4 5 minutes, with COD BO2 there is no problem...
Voltage 0 3.28 Volts [0xCD] (+3.3V)
Voltage 1 1.36 Volts [0xAA] (CPU VCORE)
Voltage 2 2.29 Volts [0x8F] (VIN2)
Voltage 3 1.27 Volts [0x6C] (VIN3)
Voltage 4 3.74 Volts [0x59] (+5V)
Voltage 5 15.75 Volts [0xB3] (+12V)
Voltage 6 3.31 Volts [0xCF] (VIN6)
Voltage 7 3.28 Volts [0xCD] (VSB3V)
Voltage 8 3.30 Volts [0xCE] (VBAT)
Temperature 0 88°C (190°F) [0x58] (TMPIN0)
Temperature 1 34°C (93°F) [0x22] (TMPIN1)
Temperature 2 35°C (95°F) [0x23] (TMPIN2)
Fan 0 2463 RPM [0x261] (FANIN0)
Fan 1 4425 RPM [0x153] (FANIN1)
Fan 2 3546 RPM [0x1A7] (FANIN2)
Fan PWM 0 65 pc [0xA7] (CPU)
Fan PWM 1 65 pc [0xA7] (System Fan 1)
Fan PWM 2 65 pc [0xA7] (System Fan 2)that 88c is troublesome i would call if your still under warrenty and explain that your pc is overheating do not let them tell you 88c is fine because they told me 72c was fine and less then 7 months later the pc completely overheated and died so do yourself the favor and call them and get it taken care of now rather then later
also add me in bf4 my origion id is irwlz610
that 88c is troublesome i would call if your still under warrenty and explain that your pc is overheating do not let them tell you 88c is fine because they told me 72c was fine and less then 7 months later the pc completely overheated and died so do yourself the favor and call them and get it taken care of now rather then later
also add me in bf4 my origion id is irwlz610
Temperature 0 59°C (138°F) [0x3B] (TMPIN0) is high too just for idle temps. Ether you have an issue or something running constantly in the background making it jump.
Your best course of action would be to call Dell when you get a chance. Your temps are not normal.Tomorrow I will clean up the waterpump system see thread:
http://en.community.dell.com/owners-club/alienware/f/3746/t/19516339.aspx
I'm an owner of the Aurora R4 with in 13 months it was almost a goner of 2500 euro, next time I will not buy an Alienware again...
I will add you irwlz!

irwlz
12 Posts
862
0
Posted December 17th, 2013 16:00
you probably need to watch your temps many of the r4's expierence overheating and the one clear way to tell is when the fans go on super speed download hwmonitor and find out yourself if its the case then look up the overheating topics in the forum