
UNSOLVED
Alienware Aurora BSOD every minute after upgrade ! pls help.
Hi guys ,
I recently decide to upgrade my one year old aurora with newer graphics card (gigabyte GTX 590) and 24 GB corsair vengeance RAM.
Did a clean install windows, update all the newest driver from dell support website as well. Mobo Bios is AO11.
But somehow someway i got a BSOD so often. Even when i run stock, it still got a BSOD . all with the same code. (124).
Don't bother with overclock, i tried OC the cpu VERY light, 3.2 to 3.33 , and got a BSOD. Tried run stock , still BSOD. Its so random and happens 1-2 times every hour. My PSU is 875 watt standard from dell. Motherboard is 4VWF2 . is the motherboard died ? or the PSU ?
I tried switching all the new part (card and memory) to my friends build and it works totally fine .(gigabyte x58 UD3r motherboard). So the card and memory should be fine.
Also, i ran Dell diagnostics full scan and no errors.
Any help would be greatly appreciated.
Many Thanks.
Responses (11)
Solutions (0)
Two questions- When you say you but it back to stock, does that mena you put the original RAM back in or just set the processor back to stock settings? Also, which drivers did you use for the 590? The one from the DELL website or the ones form the Nvidia site?
Oh I mean I ran everything at stock speeds. Both cpu, ram, graph card. And still got bsod random.
Just for curiousity, when the mb said it can use 24gb ram @1333 , and I use 24gb corsair vengeance @1600, the bios will automatically lower my corsair ram to 1333 or it'll stick to 1600 ?
I used all the driver from alienware site except nvidia card, I use the newest one in nvidia website.
im using windows 7. i put back all the cpu, ram, graph cards to my old mobo, the x58 ud3r (gigabyte) . and all works perfect . memtest,prime95, all no errors even when oc'ed.
i no longer have the china-made-alienware stock ram no more though, somehow i lost it. but pretty sure the corsair ram is not defect/faulty. could it be the motherboard or the PSU ?
thanks
Ok. Replace the new ram with the old ram and see what happens. When you go up in speed, sometimes you need to manually set the timing in the BIOS. If the BSOD's stop, it's the new RAM. If it does not, might be possible you jacked the processor up some how when you overclocked. What OS are you using? I did a search on the "124" error code but got different responses based on the OS your using.
Ok. Check this link out before you do. It says the X58 board can only support 12gb of 1600 RAM. Could be your problem. Try reducing down to 12 and see what happens.
Have you been on the Arena website? Those guys are pretty quick to respond. Here is the link. I have an R3 so I not sure how the ALX board would respond to 24gb of higher RAM. Maybe Tesla or C_ronic can chime in on this.

HaaCha
28 Posts
957
0
Posted January 15th, 2012 08:00
Aurora R3? The way dell explained t to me was those can only handle up to 16 gigs RAM.