UNSOLVED

RobJed

updated

2 months ago

R

RobJed

1 Rookie

•

4 Posts

•

13 Points

0

215

August 5th, 2026 09:12

Latitude 7430: Custom Battery Charge (50%/80%) gradually increases to 88% while always connected to AC

Hello,

I would like to verify whether this behavior is expected.

System:
- Dell Latitude 7430
- Intel Core i7-1255U
- BIOS 1.41.0
- Dell Power Manager 3.18
- Original Dell 65W AC adapter
- Battery health: Excellent

Usage:
The laptop is used as a desktop replacement and remains connected to AC about 90–95% of the time.

Battery configuration:
Custom charging
- Start charging: 50%
- Stop charging: 80%

Behavior:

After discharging below 50%, the battery charges correctly to exactly 80% and charging stops.

However, while the AC adapter remains connected all the time, the battery percentage gradually increases over several days:

80%
81%
82%
83%
84%
85%
86%
87%
88%

The increase occurs without disconnecting the AC adapter.

Additional observations:
- BIOS always shows Custom (50% / 80%).
- Dell Power Manager also shows Custom correctly.
- Battery health is Excellent.
- The white charging LED occasionally flashes for 1–2 seconds during operation.
- During weekends (almost no usage), the battery percentage is much more stable than during working days.

My questions:

1. Is it normal for Custom mode to exceed the configured 80% limit by up to 88%?
2. Does the Embedded Controller intentionally perform periodic top-off charging in Custom mode?
3. Is there an acceptable tolerance for the configured stop charging threshold?
4. Is this expected behavior on Latitude 7430 or should the battery remain close to 80%?

If anyone owns a Latitude 7430 (or another Latitude 74x0 model) and uses Custom charging (50% / 80%), could you please check whether your battery also gradually exceeds the configured stop threshold while remaining connected to AC? It would be very helpful to know whether this is normal behavior or specific to my system.

Thank you.

  • DELL-Daniel V

    Community Manager

    •

    914 Posts

    •

    5244 Points

    4

    0

    Posted August 5th, 2026 14:03

    It is odd that it's gradually going up during the week, but im thinking its just compensating for the increased power draw and is trying to ensure you don't fall under 80%. So I'm thinking this may be expected behavior. That said, I have not heard of any other reports of this happening so its hard to say without additional user input. I have my phone set to limit charging to 80%. However, it does occasionally charge to 100% on its own and this top off charging is periodically expected for battery health. That makes me think this may be expected on your 7430 to maintain the battery.

    While the battery health reads Excellent, what you would really want to do is run a battery report. One thing to note is that the design capacity has a 10% buffer so do take that into account when you run the report. This will really let you know how the battery is performing. 

    DELL-Daniel V
    #IWork4Dell
    Digital Support Forum Liaison

    New to Community? Check our FAQ!

  • RobJed

    1 Rookie

    •

    4 Posts

    •

    13 Points

    1

    0

    Posted August 5th, 2026 14:18

    @DELL-Daniel V​ 

    Thank you for your reply.

    I have already generated a Windows battery report. The battery health is excellent, and the Full Charge Capacity is still very close to the Design Capacity, so there are no indications that the battery itself is degraded.

    My concern is not the battery health, but the charging behavior.

    After every controlled cycle (battery discharged below 50%), the laptop always charges correctly to exactly 80%, and charging stops as configured. This confirms that the Custom charging setting is being applied correctly.

    However, while the AC adapter remains connected continuously, the battery percentage gradually increases over the following days without ever disconnecting AC power:

    80% → 81% → 82% → 83% → 84% → 85% → 86% → 87% → 88% → 89%

    This behavior has now been reproduced several times and matches what is shown in the Windows battery report.

    I also noticed that during normal operation the white charging LED occasionally turns on for 1–2 seconds, which makes me wonder whether the Embedded Controller is performing periodic top-off charging.

    Could you please clarify one point?

    Is Dell's Custom Battery Charge mode designed to allow the configured stop threshold (80%) to gradually increase to approximately 89% while the system remains continuously connected to AC power, or would you consider this unexpected behavior that should not normally occur?

    If useful, I can also attach the Windows battery report or provide additional information.

    Thank you.

  • DELL-Daniel V

    Community Manager

    •

    914 Posts

    •

    5244 Points

    2

    0

    Posted August 5th, 2026 18:57

    @RobJed​ This article should shed some light on the charging LED. The LED would be coming on to indicate it is charging the system, in this case toping it off to 80%. As to the gradual increase day over day, I'm really not to sure why that would occur. It does seem less likely to be by design. If it were, I'd expect it to periodically charge to 100%, drain, then stay at 80% as designated. Have you tried turning the custom charge setting off, let it discharge below 50%, then enable the feature back on? 

    DELL-Daniel V
    #IWork4Dell
    Digital Support Forum Liaison

    New to Community? Check our FAQ!

  • RobJed

    1 Rookie

    •

    4 Posts

    •

    13 Points

    3

    0

    Posted August 6th, 2026 08:51

    Thank you for the article. It explains the LED behavior for Smart Charging very well.

    However, unless I am misunderstanding it, the article appears to describe Smart Charging when Adaptive or Primarily AC Use is selected in BIOS.

    My system is configured to use Custom Battery Charge (50% / 80%).

    After every controlled cycle, the battery correctly charges to 80% and charging stops as expected. However, while remaining continuously connected to AC power, the battery gradually increases over several days and has now reached 89% without ever disconnecting the AC adapter.

    I could not find any Dell documentation describing whether Custom Battery Charge is also expected to gradually exceed the configured stop threshold in this way.

    Is this behavior expected in Custom Battery Charge mode, or is there any Dell documentation that specifically describes how Custom Battery Charge is intended to work?

  • RobJed

    1 Rookie

    •

    4 Posts

    •

    13 Points

    5

    0

    Posted September 3rd, 2026 16:06

    @DELL-Daniel V​ 

     

    I followed your suggested procedure exactly: disabled Custom, discharged below 50%, re-enabled Custom at 50%/80%, and confirmed that charging stopped at exactly 80%. However, during subsequent normal AC-powered use, the same behavior returned: 80% → 81% → 82% → 83% → 84% → 87%.

  • DELL-Daniel V

    Community Manager

    •

    914 Posts

    •

    5244 Points

    2

    0

    Posted September 3rd, 2026 16:54

    @RobJed​ Not too sure why that would be the cause then. It could be a possible BIOS firmware issue, but without multiple systems to test with, it'd be hard to say. Due to the 2023 Secure Boot certificates, you also can't downgrade the BIOS to test a different version. The only other thing I can recommend is trying out a known good battery to see if it is indeed the result of a degraded battery. The custom battery config should really just respect the values that were set in the BIOS. 

    DELL-Daniel V
    #IWork4Dell
    Digital Support Forum Liaison

    New to Community? Check our FAQ!