UNSOLVED

gohack

updated

5 years ago

G

gohack

1 Rookie

•

100 Posts

0

1182

July 16th, 2021 22:00

Inspiron 14" 5410 Laptop lack of Power Setting settings.

Hi,

I've got a new 14" Inspiron 5410, w/the Intel i7-11370H CPU, Intel Xe graphics, 16 GB DDR4 Memory, a 512 GB M.2 SSD, and Windows 10 Home.

When going into the Power Settings, the only thing shown is a very basic Balanced Plan, w/very few options under it. I've tried activating the High Performance Plan, through both PowerShell and Command Prompt, running them as an Administrator, using the command "powercfg -duplicatescheme 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c", but w/no success.  

I've also gone into Regedit, and activating this command: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power, and setting up the DWORD entry named CsEnabled, and setting it to 0.   Again w/no luck.

I tried the command "powercfg -s 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c", and that did activated the High Performance Plan under the Power Plan, but w/very few options under it. Then when I rebooted the laptop, the High Performance Plan would disappear, leaving once again, just the Balance Plan once again.

I next upgraded Windows 10 Home to Pro, and did the same as I did w/the Home version about, but w/the same results.

I've searched everywhere, w/no results.

Everyplace I look and read shows that it should be able to run in High Performance, under the Power Settings. 

Is it the laptop, having very few options, including in the BIOS, or is it the OS?

Thanks!

 

 

 

 

 

  • gohack

    1 Rookie

    •

    100 Posts

    922

    0

    Posted July 17th, 2021 08:00

    Service Tag:
    Express Service Code:
  • mpachar

    2 Posts

    873

    0

    Posted July 21st, 2021 02:00

    I'm also facing same issue, has anyone able to figure this out, also I'm not able to turn off Turbo Boost in BIOS Config, even I set the option to OFF, when I save and restart it still showing it as ON.  

    I'm having frequent heating issues with this version not sure is it an issue with some hardware or software.

    Appreciate Any help in the regard.

    Thanks.

  • gohack

    1 Rookie

    •

    100 Posts

    863

    0

    Posted July 21st, 2021 20:00

    While I realize that this is no top of the line laptop, but I didn't expect it to be essentially a De-Tuned one either. 

    The BIOS settings won't stay OFF when saved, like Intel Speed Shift Technology, Intel Speed Step, and C-States Control..

    The Power Options don't work in Windows 10.

    The CPU (i7-11370H) isn't running according to Intel's own specs.

    It's a nice laptop, and of course I wasn't expecting a gaming computer, though it isn't bad, but I wasn't expecting the issues above from happening either. 

    I've reloaded Windows 10 three times, in order to get the Power Options alone to work, but w/no luck. It just shows Balanced w/very Basic settings shown under the Advance Options. I've gone and tried to set things manually under the Command Prompt (Administrative), but w/no luck.

    I've installed Windows 10 Pro, again w/no luck.

    I've been in touch w/Dell here, and followed all their suggestions, but again, w/no luck.

    I'm thinking about simply returning it.

     

     

  • mpachar

    2 Posts

    855

    0

    Posted July 21st, 2021 23:00

    That's exactly my point why would BIOS wont accept any changes when switch OFF Turbo Boost or for that matter any of those parameters in performance.  I am seeing these issues from Day 1 and I am in continue support with Dell Technical team but no luck so far :(, Based on your response I am not sure whether I also have to go the path of returning this one. 

  • 246

    0

    Posted November 12th, 2022 18:00

    did you “run as admin” when using regedit?