
UNSOLVED
Closed
How to get Inspiron 7573 to recognize USB-to-Ethernet and then initiate PXE boot
Hi guys
I am stuck here: how do I get Inspiron 7573 to recognize USB-to-Ethernet and then initiate PXE boot
Windows 10 sees the USB-to-Ethernet just fine but I can't figure out the whole BIOS and UEFI biz to even make that USB-to-Ethernet show up at F12 as a possible device to boot from? I've enabled the UEFI network stack but that didn't do the trick - my Ethernet still doesn't show up on F12.
India support is useless and can't even figure out what PXE means, I've seen discussions and other models have been able to PXE boot so I am hoping someone has been able to get 7573 to do the same. Thank you!
This conversation is no longer open for comments or replies and is no longer visible to community members.
Responses (4)
Solutions (0)
PXE boot requires that the system firmware support the specific Ethernet adapter being used. Some Dell Ethernet-to-USB adapters and "mini-dock" adapters that include Ethernet like the DA200 and DA300 can be used for PXE booting because Dell systems support using them for this purpose. However, I don't know if Inspiron systems support PXE boot at all, even if you were to use a Dell adapter that allowed PXE with compatible systems. PXE is more of an enterprise-oriented feature and Dell makes the Latitude, OptiPlex, and Precision systems for that market. Inspiron systems are intended for individual consumers.
So after several useless reposes in other forums it comes down to using a specific USB-C dock made by DELL which is one of the few things recognized by DELL's firmware. Great work there but that's kind of the standard, no...
Anyway on the tech details, the thing is called DA200 and it's about $50. It is recognized as a PXE bootable USB Ethernet adapter and all is well after that:
After that all went well, the Ethernet shows up as a bootable device and one can actually accomplish PXE network boot:
Glad you're all set now. Yes it would be nice if any Ethernet adapter could be used for PXE, but the reason that doesn't work is that the firmware essentially needs a driver for the Ethernet adapter in order to use it as a boot device. Dell builds drivers for certain adapters into their firmware to facilitate this, but obviously they can't have driver support for every Ethernet adapter on the market in their firmware, just as Windows doesn't have native support for every device you could possibly plug into it. Unfortunately there isn't a way for users to add new drivers for other Ethernet adapters to the firmware, but even if there were, Dell's firmware isn't a standardized OS, so Ethernet adapter vendors probably wouldn't bother developing a driver just to allow Dell systems to PXE boot with it.

Bubba198
1 Rookie
•
7 Posts
3737
0
Posted April 23rd, 2018 12:00
Support doesn't even know where to go in the BIOS to enable the USB to Ethernet: