UNSOLVED

Longle045

updated

1 month ago

L

Longle045

1 Rookie

•

1 Message

•

4 Points

0

357

June 24th, 2026 17:14

G15 5530, RTX 4060 GPU permanently power-capped at 45 W on AC / 30 W on battery, request for corrective I-REV BIOS / EC firmware

Hello Dell Support,
I own a Dell G15 5530 and the discrete NVIDIA GeForce RTX 4060 Laptop GPU is
permanently power-limited far below its rated TGP. I would like to formally
request the corrective "I-REV" BIOS/EC firmware that Dell has issued for this
known power-cap issue on the G15 5530 / G16 7630.
System information
- Model: Dell G15 5530
- Service Tag: [YOUR SERVICE TAG]
- BIOS: 1.33.0 (2026-04-23) — latest available
- GPU: NVIDIA GeForce RTX 4060 Laptop GPU
- GPU VBIOS: 95.07.23.00.26 — latest Dell VBIOS (package R0K07 / A02), already flashed
- AC adapter: original Dell [330 W] adapter, correctly recognized by BIOS
- Region: [YOUR COUNTRY]
The problem
The GPU never exceeds ~45 W on AC power (and ~30 W on battery), even though its
Default Power Limit is 115 W and Max Power Limit is 140 W. This happens with the
machine on a hard, flat surface, not being moved, in a cool room.
GPU-reported telemetry under sustained 100% load (firmware/hardware values, not
OS-specific):
- Performance state: P0, GPU utilization: 100%
- Power draw locked at: ~45.0 W (Requested Power Limit = 45.0 W)
- Default Power Limit: 115 W | Max Power Limit: 140 W
- GPU temperature: 44–46 °C (nowhere near thermal limit; target is 87 °C)
- Fans: ~5000 RPM (both CPU and GPU fans)
- Active throttle reason: "SW Power Cap" only — no real thermal throttle
- Driver power service log repeatedly reports:
"Client (presumably SBIOS) has requested to disable Dynamic Boost"
This proves the limit is imposed by the system firmware (SBIOS/EC), not by
temperature, not by load, and not by the adapter. The behavior reproduces
regardless of operating system because it is enforced at the embedded-controller
level.
What I have already done (all official Dell recovery steps from KB 000217923)
- Updated to the latest BIOS (1.33.0).
- Updated to the latest Dell VBIOS (95.07.23.00.26).
- Set the highest performance / thermal profile and maximum fan speed.
- Confirmed the machine is on a solid flat surface and not moving (Laptop Mode,
KB 000215120).
- Verified the original Dell adapter is recognized by BIOS.
- Performed an EC/RTC reset.
None of these raise the cap above 45 W.
My request
Dell's own articles (KB 000217923 and KB 000215120) describe this 30 W/45 W
behavior as "by design," but also state that BIOS/VBIOS updates "fine-tune the
sensors to achieve a better balance." On my unit the balance is clearly broken:
a 115 W GPU runs at 45 W while sitting at 45 °C. Other G15 5530 / G16 7630 owners
with the identical symptom have received a corrective "I-REV" BIOS from Dell.
Please provide that corrective I-REV BIOS/EC firmware (or escalate this to the
engineering team) so the GPU can operate at its rated power limit under normal,
correctly-cooled conditions.
Thank you,

(edited)

  • Chino de Oro

    11 Legend

    •

    8569 Posts

    •

    47224 Points

    9

    0

    Posted June 25th, 2026 04:50

    For any support request, you must click on Get Help Now button (on lower right of this screen).  Dell Support does not read or respond to forum posts. 

  • AmmarSaleh50

    1 Rookie

    •

    4 Posts

    •

    14 Points

    8

    0

    Posted October 10th, 2026 10:07

    Your diagnosis is exactly right, and better documented than most: SW Power Cap only, P0 at 45 W and 45 C, EC-enforced, and that "Client (presumably SBIOS) has requested to disable Dynamic Boost" line in the driver log. That is the smoking gun. The key point is you do not need the I-REV firmware to undo it.

     

    The clamp resolves to one NVIDIA control: the EC raises an ACPI D-notifier on the GPU, and the driver turns it into NV2080_CTRL_CMD_PERF_SET_AUX_POWER_STATE, a single power-state value. That exact control is flagged non-privileged in the driver, so a user-mode program can send the GPU back to its full power state. It is the same mechanism the SBIOS uses, just sent the other direction. No firmware, no driver install, no admin, nothing touching anything signed except NVIDIA's own library.

     

    It restores full power in about two seconds, and a watch mode re-sends it the instant the EC clamps again, so 45 W / 30 W becomes 140 W and stays there. Full write-up of the trace (D-notifier to RM control, the non-privileged flag, the aux-power-state quirk) and the tool, source that builds with one gcc command:

     

    https://github.com/AmmarSaleh50/dell-g16-g15-laptop-mode-gpu-cap-fix

     

    Given your telemetry already shows SW Power Cap and P0, this is almost certainly the same cap and should clear it outright.