UNSOLVED

BertAerts

updated

9 years ago

Closed

B

BertAerts

14 Posts

0

1948

February 11th, 2018 05:00

Dell Inspiron 7000 Gaming laptop 7577 blue screen / stop error

Hi,

I have my 7577 laptop since 17/01/2018.
It is updated with all recommended drivers except for SmartByte which is not installed.
It also has BIOS 1.3.2 which can not be downloaded anymore.
Is there a known issue with this BIOS so that DELL removed it from the driver page?

But I experience now and then during startup or shutdown a blue screen / stop error.
When checking Problem Reports / Windows / Shut down unexpectedly, I see the following info:

27/01/2018 11:21 code a      AV_npf_devolo!unknown_function (on startup)
27/01/2018 13:10 code 139  0x139_0_LEGACY_GS_VIOLATION_nt!_guard_icall_bugcheck (on startup)
28/01/2018 18:05 code 50    AV_R_INVALID_npf_devolo!unknown_function (on startup)
08/02/2018 18:46 code 50    AV_R_INVALID_npf_devolo!unknown_function (on startup)
10/02/2018 23:25 code 9f     0x9F_4_nt!KiIdleLoop (on shutdown)

Does this ring a bell?

What can I do to avoid this?

My laptop also runs Ubuntu 17.10.1 linux and so far nothing unexpected happened here. The dual boot installation was only possible after turning RAID to AHCI for SATA setting in BIOS. And secure boot is disabled in BIOS to have proprietary drivers for the GeForce GTX 1060 with Max-Q design in Ubuntu.

Kind regards,

Bert

This conversation is no longer open for comments or replies and is no longer visible to community members.

  • ieee488

    6 Operator

    •

    11126 Posts

    •

    38371 Points

    1879

    0

    Posted February 11th, 2018 11:00

    Is there a newer UEFI/BIOS driver to install?

  • BertAerts

    14 Posts

    1863

    0

    Posted February 12th, 2018 01:00

    What do you mean with BIOS "driver"?

    The BIOS currently available on support webpage is 1.2.0 of 17/11/2017. I read somewhere that downgrading BIOS is not possible. So I have to wait until a new BIOS becomes available.

  • BertAerts

    14 Posts

    1590

    0

    Posted March 22nd, 2018 06:00

    I suspected the Windows 10 STOP errors to be caused by bad Intel firmware/microcode which was installed on my Dell 7577 by BIOS 1.3.2. This specific BIOS version was removed from the DELL website probably because Intel confirmed reboots with this firmware/microcode. This Intel update was made to prevent Meltdown and Spectre vulnerabilities.

    But since 18/02/2018 my 7577 runs with BIOS 1.4.2 with good Intel firmware/microcode and still I got two STOP errors:

    02/03/2018 07:04 code 1000007e AV_npf_devolo!unknown_function (on startup)
    18/03/2018 22:08 code a AV_nt!CcWriteBehindInternal (while using Visual Studio 2017 compiling cuda code)

    I hope I solved the first one by uninstalling Devolo Cockpit:
    https://www.devolo.be/service/devolo-cockpit/
    C:\Windows\SysWOW64\drivers\npf_devolo.sys was part of this software and is no longer present on my 7577.

    But while 6 out of the 7 stop errors happened during Windows startup (5) or shutdown (1) the most recent STOP error was in the middle of compiling some CUDA code with Visual Studio 2017.

    I have no idea what this CcWriteBehindInternal means and totally no idea what to do to prevent further STOP errors.

    Anyone does?

    By the way my Ubuntu 17.10 has never experienced strange errors on my 7577...