Always include version of Windows in your posts...
This site says the onboard Ethernet in the 580 is 10/100/1000 Mbps.
Does your router/modem support anything faster than 100? And do they support 400 Mbps out to the internet?
Do you have the latest network driver installed for your version of Windows? Dell only supported Win 7 64-bit and Vista 32-bit on this PC. So if you're using Win 10, you have to rely on Microsoft to install a compatible driver, or look on the net for a Win 10 driver for Broadcom BCM57788 NIC.
How are you measuring speeds?
The "link speed" is the speed the PC and router/modem communicate with each other, which is what the 10/100/1000 rating is. How you determine the link speed depends on your version of Windows.
What grade Ethernet cable are you using? CAT5 Ethernet cable doesn't support a link speed faster than 100 and you should upgrade to CAT6 cable. Even CAT5E can be questionable for routinely supporting anything faster than 100, and that may vary with length of the cable and its quality.
Thanks Ron. Yes I'm using Windows 10. System came with Windows 7, upgraded free to 10. Router and Modem are 1 year old and supports gigabit. Ethernet cables are cat 6 but of questionable quality. May buy better one. I check speeds via browser based speed check website.
The only other thing I can think of is the driver. I'll check this and follow up. Thanks again.
Thanks Ron. Yes I'm using Windows 10. System came with Windows 7, upgraded free to 10. Router and Modem are 1 year old and supports gigabit. Ethernet cables are cat 6 but of questionable quality. May buy better one. I check speeds via browser based speed check website.
The only other thing I can think of is the driver. I'll check this and follow up. Thanks again.
Are you sure "supports gigabit" means they support gigabit internet (download) speeds or only gigabit link speed between the PC and router/modem? A 10/100/1000 rating refers to the link speed.
You might consider getting a dual-band 2.4- and 5-GHz USB WiFi dongle, if you think that might be faster than Ethernet (and assuming router/modem support 802.11ac WiFi).
RoHe
12 Elder
•
45230 Posts
•
172625 Points
546
0
Posted June 24th, 2020 12:00
Always include version of Windows in your posts...
This site says the onboard Ethernet in the 580 is 10/100/1000 Mbps.
Does your router/modem support anything faster than 100? And do they support 400 Mbps out to the internet?
Do you have the latest network driver installed for your version of Windows? Dell only supported Win 7 64-bit and Vista 32-bit on this PC. So if you're using Win 10, you have to rely on Microsoft to install a compatible driver, or look on the net for a Win 10 driver for Broadcom BCM57788 NIC.
How are you measuring speeds?
The "link speed" is the speed the PC and router/modem communicate with each other, which is what the 10/100/1000 rating is. How you determine the link speed depends on your version of Windows.
What grade Ethernet cable are you using? CAT5 Ethernet cable doesn't support a link speed faster than 100 and you should upgrade to CAT6 cable. Even CAT5E can be questionable for routinely supporting anything faster than 100, and that may vary with length of the cable and its quality.