Inspiron 5675, motherboard PCIe x16 slots running at x8 speed?
So is there any significant performance decrease at x8 lanes? Also, why is the motherboard top at x8 and not x16? I hope my $1000 investment doesn't have to get returned.
According to the manual it depends on what version you purchased. Controller AMD 3rd Generation (UMA) (only with computers shipped with AMD Quad-Core APU processors) • AMD RX 560 • AMD RX 570 • AMD RX 580 • NV GTX 1060 • One PCI-Express X16, single-width/doublewidth, full length (maximum 10.5 inches) • Two PCI-Express X16, single-width/doublewidth, full length (maximum 10.5 inches) (only with computers shipped with AMD Ryzen 3/Ryzen 5/ Ryzen 7 processors)
There is not a "real time" FPS (frames per second) performance hit going from PCIe x16 to x8. Dell accepted and verified this conclusion when building the Inspiron 5675 Desktop.
For Inspiron 5675 Desktop that shipped with an AMD Ryzen Summit Ridge CPU, the PCIe slots technical specifications are as follows; Slot 1 = PCIe x16, full length running at PCIe x8 Gen3 speed Slot 2 = PCIe x1, Gen3 speed Slot 3 = PCIe x1, Gen2 speed Slot 4 = PCIe x16, full length running at PCIe x8 Gen3 speed
For Inspiron 5675 Desktop that shipped with an AMD Bristol Ridge CPU, the PCIe slots technical specifications are as follows; Slot 1 = PCIe x16, full length running at PCIe x8 Gen3 speed Slot 2 = PCIe x1, Gen3 speed Slot 3 = PCIe x1, Gen2 speed Slot 4 = PCIe x1, Gen2 speed
I was told by tech support that the motherboard has 2 PCIe x16 slots and that they run at x8 speed. I found this out when i was inquiring as to which slots are running at Gen 2.0 and Gen 3.0 speeds.
Real world.....you would never notice the difference. I've been building machines a lot of years, a motherboard with two pcie x16 slots that run full speed with two cards is a very expensive board. My last gigabyte had this capability and was three hundred dollars (3+ years ago) new, you won't find a three hundred dollar motherboard in a thousand dollar machine I can nearly guarantee you.
If you look at the fine print just about any sli or crossfire board says in the fine print that when more than one card is installed the pcie x16 run at a slower speed. You aren't going to get filet mignon for sirloin prices guy sorry to say.
Then, now that we're past the buss speed question what video card are you plugging in there? If you're not buying top of the line cards it's not going to be exceeding the capabilities of 8x in the first place. If you think you can get a better deal someplace else go for it, only way is a custom built system that you will pay quite a bit more for. My 5675 is a stand in until the threadripper isn't so insanely expensive and will be a spare machine when I rebuild my big rig.
beamermt79
6 Operator
•
2342 Posts
4060
0
Posted February 17th, 2018 11:00