UNSOLVED

thinksinc

updated

2 years ago

T

thinksinc

1 Rookie

•

5 Posts

0

3234

March 5th, 2022 16:00

Inspiron 5400 AIO volume control with HDMI IN devices

I have an Inspiron 5400 AIO, which I bought exclusively because of its HDMI IN capability, so I can connect an additional device to the display.

I have connected an NVIDIA Shield Pro via HDMI, but the volume level is so low that it's barely audible. There don't appear to be any physical volume controls on the AIO, so I cannot find a way to adjust the volume.

On the normal PC input, the volume level is fine and can be adjusted with Windows' software volume controls, but the volume seems to be at about a "1" when using the HDMI IN input.

I contacted Dell Customer Support, who confirmed that there are no physical volume keys on the 5400 AIO, which seems baffling to me. The support agent suggested that I buy and connect external speakers connected to the AIO to further control the volume, which doesn't make sense since the 5400 AIO has a built-in speakerbar and I don't want to (and shouldn't have to) connect a second set of speakers to control the volume of a connected device.

The support agent then said that the volume for any connected device would have to be controlled by the device itself.

I tried adjusting the Volume Settings of the NVIDIA Shield using both the volume buttons on its remote control, as well as trying different Volume Control settings of the Shield itself, such as whether volume control uses HDMI CEC or not, and also tried setting up Volume control over IR, which attempted to let the volume be controlled by the "TV", which it identified as a "Dell TV". No options worked or allowed me to increase the volume at all.

Is there any way to control the volume of a device connected via HDMI IN, short of connecting a second set of speakers? It seems like a big oversights to not let the user control the volume of a connected device that supports HDMI input. If I can't control the volume of connected devices, unfortunately I'll have to return the unit.

Thanks for any tips.

-R

 

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    1641

    0

    Posted March 5th, 2022 19:00

    I don't have the answers ... however, you can see this wasn't well thought-out.

    First, does the Inspiron 5400 AIO even have nice speakers or an audio system worthy of whatever you are trying to play on the Nvidia Shield ?

    Also, why try to use an expensive computer as a cheap TV ?

    I'm from a time before "barely working is good enough" ... when  people didn't watch TV and movies on tiny screens, just to consume it.

    Get yourself an AVR with proper speakers. Connect the Shield to that via HDMI. With actual speakers, it will sound good. You can then connect your "Dell TV" for a video image.

    Or, additionally get yourself a real HDTV (they are big and dirt cheap). In that case, you could be concurrently using your computer as a computer.

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • thinksinc

    1 Rookie

    •

    5 Posts

    1630

    1

    Posted March 6th, 2022 00:00

    I bought the Inspiron as a cheap system to keep in the garage so I can watch Netflix or YouTube while I work on projects. Occasionally I also want to play a 4K UHD movie from my Plex server, which the Inspiron understandably isn't powerful enough to process. I had an unused NVIDIA Shield Pro—which until recently I had connected to my main theater system (complete with an AVR a Denon X3700H paired with 9 channels of Paradigm loudspeakers, as well as a "real HDTV", a 77" LG CX OLED. It turns out I know a little something about that. With the Inspiron AIO's HDMI In, I assumed pairing the NVIDIA Shield would be a great way to let me access the content that the Inspiron wouldn't be powerful enough to run. And it worked great! Except for the volume issue. Hence my post.

    (edited)

  • Chino de Oro

    11 Legend

    •

    8554 Posts

    •

    47161 Points

    1626

    0

    Posted March 6th, 2022 01:00

    @thinksinc , did you try to adjust volume using the Dell On Screen Display Application? 

     

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    1610

    0

    Posted March 6th, 2022 09:00

    Sure, no problem.

    Yeah, I've had various kinds of computer-systems in the garage/workshop over the years. I always used old needs-to-be-recycled stuff. Moving from CRTs to LCD made it better. An old laptop was the solution for a while. Now, I just have an old Alexa Echo out there . I've tried both a fairly-nice powered PC-speaker system and also a Jabra Solemate. If I need a screen, I just take my old "hobby and drone" laptop out there or my iPad.

    Maybe you could use something like this. 

    I use it to extract the audio from my Apple-TV, and feed it back into my Onkyo-AVR for Zone-2 analog-audio. Works fine and doesn't cause any problems with the passed-thru HDMI signal. I think from there, you can send the analog audio to an old powered-PC-Speaker system, a small amp, etc. 

    I run my Plex Server on my Synology-NAS, but I still like my (Windows) Kodi-box.

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • thinksinc

    1 Rookie

    •

    5 Posts

    1599

    0

    Posted March 6th, 2022 12:00

    Thanks for your suggestion, Chino. I've decided to return the unit and replace it with a Mac-based system that I'm sure can handle whatever I need to throw at it—including volume control.

    If anyone else with this issue runs across this thread in the future, perhaps they can give your suggestion a try.

    Thanks,

    R

     

  • 1396

    0

    Posted June 14th, 2022 12:00

    @Tesla1856 - why would anyone buy an All-In-One format computer and then buy discrete components like monitor and sound systems? The market for AIO is pretty limited. I thought I'd never buy one as they represent an inflexible compromise, but I finally found myself with a small desk space and needing something more compact than my current 'laptop plus external 27" montor' setup, which has multiple power supplies, power cables, etc. A 27" AIO computer has eliminated all the clutter while offering a great 27" screen, and just ONE cable.  Now I want to plug in an old Nintendo switch so I can play games in that location. There's no room for a second monitor, or any other peripherals; I just need to know how to adjust the volume like the OP here.

    (edited)

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    1391

    1

    Posted June 14th, 2022 13:00


    @Steerpike2022 wrote:

    1. Now I want to plug in an old Nintendo switch so I can play games in that location. There's no room for a second monitor, or any other peripherals; I just need to know how to adjust the volume like the OP here.


    1. I guess call Dell. Maybe you will get a different answer to this issue.

    (edited)

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • Tigersax

    1 Rookie

    •

    1 Message

    577

    1

    Posted May 14th, 2023 06:00

    This has probably been figured out by now. I bought the 4510 in March 23. I had not needed the HDMI in until yesterday. Never thought about volume for external devices. The easiest way I found is to set the volume to maximum in windows then switch over. If it is muted in windows, it will be muted for HDMI in as well. just a thought since I was looking it up and found this thread. 

  • Theflyer76

    1 Rookie

    •

    1 Message

    0

    1

    Posted January 4th, 2024 12:00

    @Tesla1856​ 

    Hi i'm having the same problem. I just got my son the Inspiron 5415 for homework, Netflix etc but also so he can plug in his Nintendo Switch and use it as a monitor. However, when i plug it in the HDMI it blares at full volume and i can't find anyway to adjust the volume. First port of call was to switch it back to PC mode and make sure it was at a low level, less than 10, then switch it back; but still played at full volume. Switched it back to double check and was still set at low level. The Switch itself has a +/- volume control on the top. Tried those controls but didn't do anything. I tried unplugging the Switch setting it to a low level then plugging it back into the HDMI to see if it works at one set volume level as per the device, but again, it blares at full volume. It just seems to over ride everything and only play at high volume as my son can't use his new PC to play his Switch as he was looking forward to. 

    I'm been pulling my hair out trying to figure this out, so sorry i don't have an answer for you, but just wanted to let you know you're not alone with this issue. If you do find a solution please do share.

    (edited)

  • superdarwin76

    1 Rookie

    •

    3 Posts

    •

    2 Points

    0

    0

    Posted April 15th, 2025 12:20

    @Theflyer76​ I'm also trying to play my Switch on my All In One and the volume is stuck at full blast. Did you ever find a workaround?