
UNSOLVED
R
RobertoAraujo1
2 Intern
•
718 Posts
1
13735
January 7th, 2015 09:00
Ask the Expert: VMAX FAST VP and Performance
|
|
Ask the Expert: Business Continuity; disaster recovery vs. data availability Ask the Expert: SAN (Connectrix), FC Connectivity Recommendations and Best Practices |
The VMAX has multiple settings and features available on the Front end as well as on the backend within the FAST VP mechanism. Tuning the VMAX can be complex and multiple factors can impact performance. The goal of this forum is to focus on what settings and options allow full optimization of VMAX performance.
Meet Your Expert:
Technical Account Manager at EMC. Kevin has been with EMC for nearly 20 years. He has spent 15 years supporting EMC Symmetrix product range at many levels. For the last 5 years he has worked in the Symmetrix Level 2 group specializing in performance. In 2012 he moved to the role Technical Account Manager supporting an EMC Elite Customer. Kevin was also recently named as a member of EMC’s Technical Leadership Academy. |
This discussion takes place from Jan. 12th - Feb. 6th. Get ready by bookmarking this page or signing up for e-mail notifications.
Share this event on Twitter or LinkedIn:
>> Join me! Ask the Expert: VMAX FAST VP and Performance. http://bit.ly/1wrhcw3 Jan. 12 #EMCATE <<
Responses (46)
Solutions (0)
Kevin,
1) Back in 2010 when we bought our first VMAX we configured our middle tier as 300G 10K drives in 4+1R5. Maybe for the last two years it's been recommended to configure middle tier as R1. Obviously that is very expensive, what my TC explained was that if everything is bound to the middle tier then that tier will incur a lot of load because that's where the data lands first. Later on it will go up and down between the Flash/SATA tier but that middle tier needs to be "speedy". Can you please elaborate what changed, what EMC learned and why they decided to change the recommendation.
2) VMAX has never had as many knobs to tweak performance as its midtier brother Clariion/VNX. Are we losing even more knobs with VMAX3 and its SLO model. For example i know that meta volumes are no longer there so if you take a situation where i have SRDF/S volumes that are being used for Oracle redo logs. While these logs are small (8.4), we configured them as a 10 way striped meta to help with the performance (especially in SRDF/S configuration). So there is some stuff we can do in previous version of VMAX but what are we losing with VMAX3.
3) Time to ingegrate Recover Point appliances into the platform and get rid of SRDF/S/A ?
1).When you compare the number of IOPS required on the Back end of the array to complete a write to a Raid 1 vs Raid 5 device. On Raid 1 it takes to back end disk Operation to complete a Write to disk. However , on Raid 5 it is 4 disk operations to complete the write.
For this reason if you are bound to FC tier on Raid 5 and all new writes are destined for FC tier, then it will lead to more Back end IOPS to. By Using Raid 1 it reduces the Fc disk load.
The reason for the change in policy was based on analysis for Customer data in a production state.
2). Yes there are fewer Knobs on VMAX 3 simply because they are not required. The reason for this is that on VMAX there is complete redesign of the architecture. The Core CPU processing characteristics have changed to allow simpler deployment, allocations etc.
in relation to SRDF and Oracle Redo and other specific apps the new design can handle this without the need for Meta due to again the removal of the limitations on the earlier VMAX model.
3. In my honest opinion SRDF on VMAX will be faster and more efficient than the current VMAX. So RPA not needed unless there are other business reasons for it . But performance not compromised on VMAX 3 SRDF
Is there a doc / KB article that explains what priorities the different FAST processes get.
We have FC PRC set to 10%, if we have an inbound migration over SRDF and bind the target devices to FC this may take the pool to 95% full.
Other instances might be a server importing a large amount of data which requires new extents - this could push also FC over it's PRC limit.
Are requests for new extents over RDF treat the same as new extents requested by a server or does one have a higher priority and what effect (if any) does this have over standard performance FAST moves.
=========================================================================================
Another question is around AllocByFastPolicy - how does the array determine which of the other tiers new extents should be served from assuming EFD / SATA both have free capacity ?
=========================================================================================
When write pending starts to get high, what effect does this have on FAST movements and at what levels of WP do each of these limiters take effect ?
What not to do with FAST VP:
1. As you mentioned, it is not advisable to Bind to SATA.
2. In my experience, limit the number of policies in use.
3. Stick to the default setting around The workload analysis period.
4. Bind By Policy should be enabled, if you are running 5876.229 and above.
I am going to share a link cover FAST VP best practice.
Is there a doc / KB article that explains what priorities the different FAST processes get. We have FC PRC set to 10%, if we have an inbound migration over SRDF and bind the target devices to FC this may take the pool to 95% full. Other instances might be a server importing a large amount of data which requires new extents - this could push also FC over it's PRC limit. Are requests for new extents over RDF treat the same as new extents requested by a server or does one have a higher priority and what effect (if any) does this have over standard performance FAST moves. ========================================================================================= Another question is around AllocByFastPolicy - how does the array determine which of the other tiers new extents should be served from assuming EFD / SATA both have free capacity ? ========================================================================================= When write pending starts to get high, what effect does this have on FAST movements and at what levels of WP do each of these limiters take effect ?

RobertoAraujo1
2 Intern
•
718 Posts
2316
0
Posted January 12th, 2015 06:00
Your questions are welcome now as the event has began. Let's keep this conversation respectuful and dinamic.
Cheers!