Cannot monitor N-series through OpenManage Enterprise
Hello,
I've installed OpenManage Enterprise v3.9 build 55 to monitor the status of our Dell equipements. I noticed that some of our recently updated switches (N2048P: firmware 6.7.1.6 and N2024: 6.7.1.13) cannot be accessed through SNMP by OME. The error message is the following:
Message: Unable to discover the device because the protocol SNMP used for discovering this target is not supported.
Recommended actions: Enter a valid and supported protocol, and then retry the operation. For information about supported protocols, see the OpenManage Enterprise-Modular User's Guide available on the support site.
Only those 2 switches cannot be accessed by OME when running a discovery. When I try to troubleshoot using the OME tools, I can access the devices using SNMP. There is no firewall blocking the connection between them.
Thanks for your answer. Yes, I have 6 of them being successfully discovered. The only difference between them is the firmware versions (the 6 who are working have some old firmwares).
I am also having this issue. I have an older firmware N1548P Switch (6.5.3.3) that is added in, but the newer firmware N1548P Switch (6.8.0.1) will not add. I will be watching this to see what the response from Dell is. All ports are open for me, discovery is working for the older firmware, so I know it's open and working.
Not related to OME but after updating our N20xx switches they cant use with MACmon(NAC solution) anymore because SNMP was changed.
From a OME perspective its only used the most basic SNMP function compared to OMNM for example. It makes me wonder how a vendor can mess something up which works for years.
According to engineering, right now, it is functioning as designed. Those N-series switches were not designated compatible.I understand it is working on older firmware but there is no supporting documentation for that.
I have forwarded this information to L3 Engineers. Maybe there will be a fix in the next release but I have no information when that will be or if it will support N-series switches.
DELL-Charles R
Social Media and Communities Professional Dell Technologies | Enterprise Support Services #IWork4Dell
Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!
I appreciate you forwarding this on. Any information they bring back would be helpful.
It looks like a change in the N Series Firmware that caused the devices to not function correctly anymore, so hopefully they can shed some light on that subject and help out here.
DELL-Charles R
Moderator
•
4730 Posts
•
25476 Points
620
0
Posted October 7th, 2022 12:00
Hello CyrilBuchsLDS,
Do you have any other N series switches that are discovered?
I don't see them on the support matrix:
Networking device support :
https://dell.to/3Ck9Rcf
DELL-Charles R
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!