
UNSOLVED
C
cviniciusm
25 Posts
0
2192
September 10th, 2009 11:00
Where is the SNMP MIB's files of Connectrix 16B2 and 4100B, please?
Hello,
Where is the SNMP MIB's files of Connectrix 16B2 and 4100B, please?
TIA,
cviniciusm.
Where is the SNMP MIB's files of Connectrix 16B2 and 4100B, please?
TIA,
cviniciusm.
Responses (2)
Solutions (0)
conor_a_mcmahon
30 Posts
635
0
Posted January 21st, 2014 06:00
Below is a link to supported hardware and end of service life dates for connectivity supported switches.
The Mcdata 16B2 model of switch is end of service life since the 31-DEC-2009.
While the Brocade 4100B is end of service life since the 31-Jan-2013.
You can refer to the pdf in the link below which refers to the products end of service life dates.
http://www.cs.isus.emc.com/MyGSi/VisitURL.asp?url=53119
All the firmware currently available for Emc Connectivity 'Brocade' and 'Mcdata' supported switches are listed at the links below.
Mcdata firmware currently available:-
https://support.emc.com/downloads/7846_Connectrix---M-Series
Brocade frimeare currently available:-
https://support.emc.com/downloads/7843_Connectrix---B-Series
MIB files for Emc supported switches and firmware versions would also be at the above locations.
I also listed an article below on how to request old firmware if its no longer available on the website.
Connectrix: How to obtain old firmware versions for Connectrix Switches.
Reference the article below:-
https://support.emc.com/kb/12369
Otherwise reference primus 'emc220383'
Regards
Conor
Reply

BRuehl
40 Posts
635
0
Posted September 10th, 2009 12:00
Here is a link : http://wwwprod.brocadeconnect.com/brocdoc/viewSummary.jsp?cat_id=66668531&bcflag=manual