Please note that PP need to be reinstalled after a kernel upgrade. We have seen Not doing so earlier. I remember seeing the same symptoms mentioned and the resolution as far as i remeember is reinstall the HBA driver on the new kernel. Note that we were not using boot from SAN
The reason why it is not finding the dirname and expr commands is because the path doesn't include them. I solved this problem by editing /etc/rc.d/rc.sysinit and putting the following lines after the line that says unamer=`uname -r` (should be about the third line down):
SKT136306
31 Posts
298
0
Posted January 13th, 2010 05:00