The Mezzanine cards in M640 for connection to PERC
Hi everyone,
Are the mezzanine cards required condition for connection blade servers to PERC?
The diagram shows that PERC uses mezzanine cards for connection with blades. (I mean connection servers to RAID) The configurator on the dell website doesn't allow to choose mezzanine cards, are they included by default?
Thank you for your answer! I think, If they don't include by default, servers won't to connect with shared storage, so you can't buy servers without mezzanine cards.
When you install M640 on VRTX chassis we can not use Mezz slot for connecting any of the network mezzanine card. You need to connect 2 PCIe Mezzanine Bridge cards (Dell Part #3N9XX) on M640. Once these bridge cards are installed you can use CMC to create a virtual disk on shared PERC and assign it to the server. You can also insert PCIe card to chassis PCIe slot and connect it to the server using CMC
Refer below link for assigning shared storage to the server using CMC
DELL-Josh Cr
Community Manager
•
9792 Posts
•
45323 Points
4500
0
Posted August 20th, 2018 10:00
Hi,
You may want to check with sales for your country but it looks like the pcie passthrough mezzanine cards are coming standard.