Can anyone give me a link to a website selling this? I'm buying one module with the system, and want to buy another one, separately. I can't find HyperX at 2933MHz for sale anywhere. What am I missing here? Thanks.
Looks like your best bet is to just buy it with two modules (if that is an option) as I too don't find it aftermarket. I find a lot of Kingston HyperX but not that specific 2933Mhz.
Inspiron 16 5630 Laptop and WD22TB4 Docking Station
Self-built desktop for recording studio application
I went directly to Kingston since they manufacture the Ram for Dell under an OEM agreement. To make sure you get the right stuff send a picture of what is currently installed in your system. They will cross reference it and give you exactly what you need. I found out the 2933mhz is actually 2133mhz ram overclocked by the bios provided with the alienware. Either that you can run separate ram on the second channel and get something other than the OEM. It's shameful under the build when you buy the PC, Dell states it's upgradeable and at this time you cannot buy Ram from them for these machines @ 2933mhz. They do not even have an estimated time frame of when they will start carrying it. The warranty may be compromised as well if you add Ram in that was not purchased directly from Dell. Really disappointed with Dell over this simple upgrade.
I also contacted Kingston support and after sending the picture of my RAM and two screenshots of CPU-ID with the SPD and memory tabs, they told me to look for Kingston HX430C15PB3/16. It would "probablay"!!! work with my OEM-RAM. As this HX430C15PB3/16 is the Predator series of Kingston and my DDR4 is a Fury series module, I again asked if they are sure it would work but did not receive an answer yet. (asked yesterday)
Dell, in many opinions including my own, has done us a disservice by selling single 2933 DIMM's in these machines, since they cannot seem to stock add-ons, and their sales people are telling us single is as good as dual; it is in fact roughly 25% slower overall. Expecting a pair of 2933 8GB's (as indicated in the service manual), I was surprised to find a single 16. Kingston may be saying their 2133 's will o/c, but unless somebody has tried it, I wouldn't count on it, and they told me they cannot sell the OEM Dell part. I found somebody had successfully used G.Skilz Ripjaws V 3000, so I bought a pair of them, had no problem with XMP1 2933, and got big improvement in the benchmark.
Dell, in many opinions including my own, has done us a disservice by selling single 2933 DIMM's in these machines, since they cannot seem to stock add-ons, and their sales people are telling us single is as good as dual; it is in fact roughly 25% slower overall.
Agreed.
Many of us found the same on Aurora-R6. Luckily, I managed to get mine swapped out (a single DIMM for a matching pair). I also tried to help others, but not sure how all that turned out (with Dell in the middle) but I tried.
However, I thought they had fixed it on the Aurora-R7 sales-config pages. I remember looking once, and they specified how many DIMMs on the optional line-item ram selections (the higher-end ones anyway).
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
Interestingly, the DDR4 HyperX Fury 2933 RAM is suddenly available on the HyperX website. Last week they couldn't tell me anything about it. As far as I can tell, this is the specific RAM for the Aurora R7.
I was wondering well they work ok with Auroa R6 also since I have just one 16GB HyperX at 2666MHz by buying one or get two for replacement instead.
Just a reminder ... the pair of DIMMs in the same bank (so they run dual-channel) ... must match exactly. So much so, that they are normally only sold in (and installed in) exactly matching pairs .
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
fireberd
11 Legend
•
33399 Posts
•
112848 Points
10728
0
Posted January 26th, 2018 05:00
Looks like your best bet is to just buy it with two modules (if that is an option) as I too don't find it aftermarket. I find a lot of Kingston HyperX but not that specific 2933Mhz.