Hi, every time i switch on my new Aurora R10 (5900x, 6800xt, 32GB HyperX Fury 3466MHz xmp, latest bios version, BAR on auto) the Alienhead flashes 3 times in white color (2-1 Code, not amber) and then starts up normally. Problem does not occur while rebooting, only on startup. Is there something wrong with it? Diagnostics said no problems at all... Any hints? Thanx alot
Could you try disabling ReBAR in your motherboard bios, and see if the problem goes away?
Technically speaking it should work fine with an AMD card, but AMD calls it SAM instead of Rebar, and there might be some odd compatibility issue or a firmware bug causing the issue.
Unfortunately disabled sam/bar support did not solve the problem. Maybe awcc causes the problem, because every time i switch oc mode in awcc and restart, the white flashing alienhead comes up too. So imho it has something to do with switching bios options in windows...
The 2-1 flashing even occurs when OC is disabled... Dell changed mobo, memory and cpu. Problem persists. Anybody with same problem and could solve it? I dont think, that i am the only person with r10 and this problem...
That's an odd one, since they changed all the main components. Could be some kind of issue with REBAR and AMD CPU/Video Card combination. I have not noticed anyone else reporting this issue.
R10's are typically pretty solid with few reported issues.
Maybe someone else has an idea, because I am out of ideas. Realistically since they changed everything else out besides the video card and the PSU, those are the only 2 main items left to change...
I have seen some users reporting oddball behavior sometimes from Alienware Control Center. you could try uninstalling it and see if that makes the issue go away.
I uninstalled ACC, but that didnt change anything. Besides psu and video card it could also be the led controller/chassis or the killer wifi card. Is there anybody with same or similar system, who doesnt have these issues? I just want to be sure it is an unique issue...
Try uninstalling the Alienware OC control program, it is separate from AWCC. If the problem were due to an oc setting, it would be due to the OC control program, not AWCC.
r72019
8 Professor
•
5344 Posts
1231
0
Posted June 3rd, 2021 09:00
See if disabling windows fast startup eliminates the issue.