maemura

が更新しました

17日前

解決済み!

解決策へ移動
M

maemura

2 Intern

•

407 投稿

•

50 ポイント

0

81

2026年10月29日 10:19

PowerStoreOS 5.0の初期セットアップについて

PowerStoreOS 5.0の初期セットアップ手順を確認したく環境やセットアップについて調べています。

 

検証環境にPowerStoreOS 4.0があるのですが、PowerStoreOS 5.0にアップデート後に再初期化すれば、PowerStoreOS 5.0の初期セットアップが実施できますでしょうか?

 

再初期化はkb000180964に記載のsvc_factory_resetコマンドでよかったでしょうか?

 

Dell PowerStore Planning GuideのPowerStore licensing methodsを参照するとPowerStoreOS 4.3以降でDynamic Licensingとなり、Support Connectivityを構築していれば自動取得されるという内容が記載されていますが、手動でライセンスをインストールしなくても自動でインストールされるのでしょうか?

 

Support Connectivityを構築していない場合、手動でDynamic Licensing Offline (disconnected)をインストールすることになると思うのですが、ライセンスインストール後にSupport Connectivityを構築するとOfflineではない形式(?)に変更されるのでしょうか?

変更される場合、自動で変更されるのでしょうか?それとも手動で変更するのでしょうか?

  • ayas

    Community Manager

    •

    7537 投稿

    •

    68231 ポイント

    0

    0

    投稿済み 2026年10月30日 05:46

    Maemuraさん


    検証環境にPowerStoreOS 4.0があるのですが、PowerStoreOS 5.0にアップデート後に再初期化すれば、PowerStoreOS 5.0の初期セットアップが実施できますでしょうか?
    →再初期化のKBにもあるように。再初期化の時点でのPowerStoreOSがそのまま維持され、すべての設定が初期化されます。そのためご認識の通り、
    PowerStoreOS 5.0にアップデート後に再初期化すればセットアップの実施が可能です。


    Dell EMC Knowledge Article 000180964 : PowerStore: How to Reinitialize a PowerStore System to Factory State Using the svc_factory_reset Command


    This is a destructive procedure. All data and all configuration on the system is permanently deleted and cannot be recovered. The system is returned to a factory state (same state that it was when initially acquired).
    This procedure reinitializes the system to the same PowerStoreOS version installed on the PowerStore.

     

     

    再初期化はkb000180964に記載のsvc_factory_resetコマンドでよかったでしょうか?
    →ご認識の通りです。先述のKB 000180964 の手順に沿って、①両ノードのハードウェア状態確認、②両ノードを Service Mode に移行(svc_rescue_state set → svc_node reboot local)、③プライマリノードのみで svc_factory_reset を実行、の流れとなります。

     

     

    Dell PowerStore Planning GuideのPowerStore licensing methodsを参照するとPowerStoreOS 4.3以降でDynamic Licensingとなり、Support Connectivityを構築していれば自動取得されるという内容が記載されていますが、手動でライセンスをインストールしなくても自動でインストールされるのでしょうか?
    →ご認識の通り、Dell connectivity servicesへの接続環境であれば自動でライセンス取得、インストールがされます。

     

     

    Dell PowerStore Planning Guide for PowerStore 500, 1000, 1200, 3000,3200, 5000, 5200, 7000, 9000 and 9200
    Page 16

    Automatic licensing
    For systems connected directly to Dell connectivity services, PowerStore licenses are automatically obtained and installed on all the appliances in your cluster during initial configuration.

     

     

     

    Support Connectivityを構築していない場合、手動でDynamic Licensing Offline (disconnected)をインストールすることになると思うのですが、ライセンスインストール後にSupport Connectivityを構築するとOfflineではない形式(?)に変更されるのでしょうか?
    → Dell PowerStore Planning Guide には、初期構成中だけでなく初期構成後であっても、ポート443の開放または Support Connectivity の構成により、
    ライセンスを自動で取得できる旨が記載されています。
    そのため、Offline でライセンスを適用した後に Support Connectivity を構築された場合も、以降は自動でのライセンス取得が可能になると考えてよさそうです。

     

    Dell PowerStore Planning Guide for PowerStore 500, 1000, 1200, 3000,3200, 5000, 5200, 7000, 9000 and 9200

    Page16
    To obtain licenses automatically during or after initial configuration, ensure that the port 443 is open or that you have configured Support Connectivity

     



  • maemura

    2 Intern

    •

    407 投稿

    •

    50 ポイント

    2

    0

    投稿済み 2026年10月30日 07:18

    @ayas​ さん

    ご回答ありがとうございます。

    PowerStoreOSをアップデートして確認してみます。