Which battery is weak? Motherboard battery or main power battery? Does this problem happen when laptop is plugged into its power adapter?
You could try disabling TPM, but just be prepared with a complete backup image of the drive. If you disable TPM and it doesn't boot, reenable TPM again in BIOS, and then boot from the imaging software's own USB stick to restore the backup image. So be sure to prepare that USB before you change TPM too.
Does this only happen when you do a Start>Restart from inside Windows, or when you boot the PC the first time?
I'd be concerned a BIOS update may fail to reboot the PC, which is necessary, and that could brick the motherboard...
The other option might be to disable TPM and do a clean install of Windows and apps. Just make sure everything is backed up on external media first.
Look in Windows Event Viewer for any errors around the time it crashes, instead of restarting. That could point you at the failing component, eg a driver...
Run these commands:
At desktop, open a CMD prompt window, Run as administrator
At the prompt, type in chkdsk c: /r and press Enter. Accept offer to run chkdsk at next boot and reboot. chkdsk will run before Windows loads. Be patient, this can take a while, depending on drive size. Read this on how to view the chkdsk log file.
Assuming no chkdsk errors and back at the desktop, open a CMD prompt window, Run as administrator
At the prompt, type in: DISM.exe /Online /Cleanup-image /Restorehealth and press Enter Be sure to include one space in front of each / and note any error messages when that's done.
Assuming no unfixed errors in #4, at the CMD prompt, type in: sfc /scannow and press Enter. Be sure to include one space in front of the / and note any errors when that's done.
See if that helps and/or they give you error messages...
Thanks for your comments. This issue happened for some time, so, I did a fresh new installation recently (boot from USB drive, remove all pre-partitions, format the hard drive, and do a clean window 10 installation there), then do windows' update to get the most driver updated. But the issue still there, every time when I try to do windows reboot, it is just go to shutdown instead, and I have to press power button again to get it started.
I will try those commands you suggested and let you know what I found.
Tried those commands you suggested and found the followings:
1. Lots of TPM error after running the chkdsk command,
The device driver for the Trusted Platform Module (TPM) encountered a non-recoverable error in the TPM hardware, which prevents TPM services (such as data encryption) from being used. For further help, please contact the computer manufacturer.
Is Win 10 fully up-to-date? Note: Support for Win 10 v1909 ended ~2 weeks ago, so you may need to update to a newer version that's still supported.
Reboot and tap F12 to open the menu. Launch the diagnostics and run the tests including extended drive tests. Copy error messages, if any
Back up (image) your HDD on external media before going any further.
Don't know if you can change any of these settings and still be able to change them back, without having to wipe the install and start over. So an image is essential (see above):
Is TPM enabled or disabled in BIOS setup? Is Computrace enabled or disabled in BIOS setup? Is Secure Boot enabled or disabled in BIOS setup?
And if PC is still under warranty, you may have to contact Dell Tech Support....
Just saw your message today, and I did run the through diagnostic through F12 and it didn't return me any errors (except one saying the battery is weak and may need to be replaced soon).
Checking others you mentioned and I found:
TPM is enabled in BIOS setup. Computrace is set as Deactive now in BIOS setup Secure Boot is disabled in BIOS setup.
It looks like the Computrace and Secure boot are allowed to be modified.
Per Bios update, Dell has a newer one available now, but because I can not do restart properly, it can not be updated. Should I create a USB bootable drive and copy that newer version Bios and do the update that way?
I see this issue was reported by some one last year, and several people had the similar problem as well, but unfortunately no answers or solutions have been given or addressed.
You can read all about TPM here. If you don't use BitLocker, you probably don't need TPM enabled.
Do I understand correctly that you don't have the Restart issue now that TPM is disabled?
I would create a bootable USB stick and do the BIOS update outside Windows. Just read/follow the instructions carefully. Once it starts, just leave PC alone until it's done.
If you need to create a bootable USB stick, you can use Rufus (free). After you make the stick bootable, copy only the BIOS update .exe file onto it. With PC powered off, plug the stick into USB, power on and tap F12 to open the menu and select the option to boot from USB.
When you get to the prompt, type in the full name of the BIOS file, including .exe and press Enter.
RoHe
12 Elder
•
45230 Posts
•
172625 Points
959
0
Posted June 2nd, 2021 12:00
Which battery is weak? Motherboard battery or main power battery? Does this problem happen when laptop is plugged into its power adapter?
You could try disabling TPM, but just be prepared with a complete backup image of the drive. If you disable TPM and it doesn't boot, reenable TPM again in BIOS, and then boot from the imaging software's own USB stick to restore the backup image. So be sure to prepare that USB before you change TPM too.
Does this only happen when you do a Start>Restart from inside Windows, or when you boot the PC the first time?
I'd be concerned a BIOS update may fail to reboot the PC, which is necessary, and that could brick the motherboard...
The other option might be to disable TPM and do a clean install of Windows and apps. Just make sure everything is backed up on external media first.