I wish to upgrade the current 460w PSU to a Dell model V1M9K 1350w PSU. The 460 is an 8-pin connector. Will the 12-pin connector of the 1350w PSU function with the motherboard 09M47G ?
Agreed. I would go with one of these. It should run it fine ... even with a high-config ... as it was ever factory config-ed and sold. Including with best offered Intel CPU option (Intel i7 or i9), 16-32gb memory, and the nicest video card that was ever offered (that could fit, cool properly, and PCIe-Power-Cable connect properly).
I suggest you not make the machine something it was never designed to be.
Finally, personally ... if I had a choice, I would go with one of the Delta-made models.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
@Tesla1856 Thank you for your response. I have tried one of the listed PSUs, the 8YJCT. My 8960 wouldn't power on, altho the Green LED on the PSU did light for the 3 seconds. Sent it to Dell after re-installing the original 460w PSU and a new MOBO.
DELL-ChrisM2
Community Manager
•
1993 Posts
•
10000 Points
5
0
Posted November 4th, 2026 13:36
Unknown if this will work on the XPS 8960 motherboard 9M47G.
Dell V1M9K 1350W PSU was only tested/validated by Dell with the Alienware Aurora R15.
The XPS 8960 was never tested with a 1350W PSU.
Validated XPS 8960 1000W PSU =
43YPM Acbel
H5XKY Acbel
G6K9K Delta
RD0G0 Delta
8YJCT Liteon
R61D8 Liteon
#IWork4Dell
