URGENT: while repairing windows xp on inspiron 600m start getting messages that
files can't be found in i386
I installed new memory a month ago and started seeing frozen screens. I ran memory test overnight and no problems were detected. I started the windows xp repair using my Dell Reinstallation CD Microsoft Windows XP Professional including service pack 2 and shortly after telling it to accept English as a default I start getting messages that it can't find files like cmprops.dl_ in i386 folder - even tho the CD is in the slot.
I have put the old memory back in and tried the old memory in just one slot but can't get anywhere. I can't boot off the hard disk because it has left me in an unfinished state.
I bought a new cd drive a month ago from Dell. I've been able to read CDs w/out problem up to now. I've not used the CD before. It's been in an envelope and doesn't look dirty.
firstlynever use microsoft tests ...try memtest ....worx like a bomb ......it could aslo be a conflict ...remeber that there are still certain memory types that dont like each other try keeping them the same
The best way to run memtest86 is to make a bootable CD to run it (there is an .iso file on the memtest86 site for this) and then boot to that CD. It will then test the memory on your system (RAM, as well as CPU cache).
Thx for your input! So nice to have people willing to share. It turns out that I had some corrupted file permissions.
My disk was cloned and then we reformatted and installed everything anew. No subsequent glitches. I will use this memory test just in case and periodically going fwd.
Do you get the lockups doing anything in particular? e.g., does it always happen with one particular application, or when you do a particular task, or does it appear to be completely random.
PapaSmurf66
10 Posts
588
0
Posted December 7th, 2008 19:00
It could be a dirty, smudged, or scratched installation CD. It could be a dirly CD drive. It could be a hard drive going bad. It could be overheating.
Also, what memory test did you use?