i read multiple hardware docs but still didn't get a clear picture of few things.
SAS i/o ( Assume we have 1 DPE and 1 DAE ):
one SAS I/O module in slot 0 of each SP ( A second SAS I/O module in slot 1 is optional ) Each I/O module has 4 ports.
SAS I/O modules ports are connected from SPS --> DPE0 / DAE0 .... ( SP A0 port 0 --> DPE0 & SP B0 port 0 --> DPE0 ..etc. Basically 2 connections from SPS to each DPE/DAEs)
bus connections of DAE0 stmt is interchangable of SAS connections of DAE0 ?
so it has 2 SAS connectons so can i read the above stmt as DAE0 has 2 bus connections bus 0 and bus 1 ( bus 0 Enclosure 0 & bus 1 enclosure 0 )
so question is can i call this SAS connections as bus connection right .bec i confused with BUS term and purpose.here in this below picture Bus0 enclosure 0 and BUS1 enclousre 0 are SAS connections from SP A & SPB and both consists of same disks ( enclosure ) b? pls correct me i am wrong. thank you.
If it is about the drives : In VNX the drives are being identified by the Bus-id_Enclosure-id_slot. For example, The drive in the 5th(counting starts from 0) slot of the direct connected enclosure from backend port BE0 will have an address 0_0_5 (bus= 0, encl=0, slot=5 ) and the on the expanded (daisy chained) enclosure the addresses will be in the form 0_1_x .
As you pointed in the snap, if you expand the BUS 0 ENCLOSURE 0 or 1 ( by clicking the + button to the left) you will see the drives in those enclosures, and those are addressed as I mentioned above. I hope this clarifies something for you.
i know...its kind of begineer to this emc hardware , i understand couple of thing here from ur input. can we tell how many DAEs this system has from this below image ..thank you so much for ur valualble answers & time.
It seems you have populated all the Bus with 2 DAEs, ie 16 numbers in total.. DAEs (Disk Array Enclosures) are the drive enclosures which are listed as Bus X Enclosure X in your snap.
Rainer_EMC
6 Operator
•
8645 Posts
462
0
Posted July 15th, 2012 07:00
One connection from each SP to the DAE - so two in total
Plus two daisy chain connections to further DAEs in case you have more DAEs than buses