Jiri.Barta

updated

11 years ago

JB

Jiri.Barta

12 Posts

0

1475

July 9th, 2015 06:00

Manage CIFS users after change interface

Hi, do you help me with my problem ...

I have CIFS with one eth. interface. That I went and added another (different IP address). Since then, does not manage users through the MMC.

When you add back the original, everything works.

VNX5500 - file, FW: 7.1.76-4, 05.32.000.5.215

Thank you for your advice.

Jirka.

  • Jiri.Barta

    12 Posts

    1097

    0

    Posted July 10th, 2015 03:00

    Problem is resolved.

    Problem was in NETBIOS name. If I send request to NEW interface, server return NETBIOS as OLD name = OLD interface. After change NETBIOS name, all is all right.

    Thank you, Jirka.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    929

    0

    Posted July 9th, 2015 06:00

    why do you need two interfaces ?

  • Jiri.Barta

    12 Posts

    930

    0

    Posted July 9th, 2015 06:00

    No two, but change IP address.

    On first I remove interface and add new, with different IP address.

    Jirka.

  • zenneosen

    26 Posts

    930

    0

    Posted July 9th, 2015 07:00

    Hello Jirka,

    Please provide me more information about your request.

    Do you want to modify the existing interface with the new IP Address (or)

    Create a new Interface and assign an IP Address for that interface.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    930

    0

    Posted July 9th, 2015 07:00

    once you swapped the interfaces, did you make sure that it was properly updated in DNS ?

    server_cifs server_2

    make sure it says "Updated to DNS"

  • Jiri.Barta

    12 Posts

    930

    0

    Posted July 9th, 2015 07:00

    My steps ...

    Create new interface

        server_ifconfig server_2 -create -Device trk0 -name eth-new-01 -protocol IP xx.xx.xx.xx 255.255.255.0 zz.zz.zz.zz

    Add this interface to CIFS

        server_cifs dm-server-01 -add standalone=srv-server-01,workgroup=work,interface=eth-new-01

    == Now is manage users through MMC all right. Through OLD interface no. This is OK.

    Remove old interface

        server_cifs dm-server-01 -delete standalone=SRV-SERVER-01 interface=eth-old-01

     

    == Now does not function manage users through NEW interface. Share is all right.

  • Jiri.Barta

    12 Posts

    930

    0

    Posted July 9th, 2015 07:00

    CIFS is standalone.

    Both IP addresses I have on local hosts file.

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    930

    0

    Posted July 9th, 2015 08:00

    Try to unmap share and destroy security context – then map again

    Or just reboot the client you are running mmc from

  • Jiri.Barta

    12 Posts

    930

    0

    Posted July 9th, 2015 08:00

    zenneosen:

    I was try both. From CLI and GUI. Both have same results.

    Rainer_EMC:

    I was try reboot and another machine, but with same error.

    MMC error:

      "Unable to access the computer \\srv-server-01. The error was: The

      binding handle is invalid."

    But share is sucessfuly connectly. I have same login on client and CIFS.

  • zenneosen

    26 Posts

    930

    0

    Posted July 9th, 2015 08:00

    There would be a downtime of couple of minutes.

    Create a new Interface in the GUI.

    Go to the CIFS Server on the VNX GUI uncheck the old interface.

    Check the new Interface as the CIFS Server IP OK and confirm it.