Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility. Questions written to the users' own "Discussions" space don't get the same amount of attention and questions can go unanswered for a long time.
You can do so by selecting "Move" under ACTIONS along the upper-right. Then search for and select: "VNX Support Forum" which would be the most relevant for this question.
Can I assume you have a Unified platform? Do you have Control Stations, data movers, and storage processors? The reason I ask is that the answer will need to account for all. For instance, DNS and NTP need to be set for each piece of equipment since they have external interfaces:
1) Unisphere Domain
2) Control Station(s)
3) Data Movers
The alerting (SNMP and SMTP) also will need to account for both block and file features if you have a Unified platform (and not just block or file).
Fair enough, I will assume that you own a Unified platform so I'll provide the breadcrumb trails for all possible components.
Unisphere Domain
==============
1) All Systems > Domains
a) "Configure NTP"
b) If running VNX OE for Block v32 (not available with v31), for each domain (such as "Local") > "Configure DNS"
For each separate array
=================
Control Station
1) System > Control Station Properties
NOTE: if anything needs to be modified, you will need to log in as (local) root
a) "NTP Servers" (comma separated - you can also hover over the text to be reminded of the same)
b) "DNS Servers" (comma separated)
Data Movers
2) System > Hardware > Data Movers
a) Right-click on each primary data mover (not required for standby) > Properties
b) "NTP Servers" (comma separated)
Assuming you are doing CIFS...
3) Storage > Shared Folders > CIFS
Click on the "DNS" tab and specify domain, dns server, and protocol for each primary data mover
SMTP and SNMP
=============
This gets a little more involved, but I will try to note all of the places that accept these:
4) File
a) System > Manage Connect Home for File
Under "Email", specify "Email-SMTP"
NOTE: if anything needs to be modified, you will need to log in as (local) root. This is for alerting back to EMC only and you should not include yourself on this list, but instead configure the following...
b) System > Manage Email User for File
This is to receive the same alerts that are sent to EMC (via Connect Home) and used for the SMTP settings for the following...
c) System > Notifications for File
The following accept both: "E-mail Addresses for Notification" and/or "SNMP Traps for Notification"
- Event
- Storage Usage
- Storage Projection
- Data Mover Load
5) Block
a) System > Monitoring and Alerts > Notifications for Block
- Create Template
- Select desired categories/events
- Complete E-Mail, Paging, and/or SNMP tab
- Distributed Monitors > Use Template (depending on environment may require use of Centralized)
b) System > Hardware > Storage Hardware
- Expand "Bus 0 Enclosure 0" > SPs
- Right-click SP A > Properties
- Under the Network tab > SNMP Settings (this is for for read/SNMP-GET requests)
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
Please open a new thread so it will have more visibility.
Can you elaborate the issue, and explain a bit about the configuration you have made.
Are there any firewall/exchange settings that we need to check?
If one user gets the email then it means the packets are being sent from the array and it seems o work, maybe if we dig a little deep into the config we might be able to find the problem.
christopher_ime
6 Operator
•
1962 Posts
5811
0
Posted September 1st, 2013 19:00
Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility. Questions written to the users' own "Discussions" space don't get the same amount of attention and questions can go unanswered for a long time.
You can do so by selecting "Move" under ACTIONS along the upper-right. Then search for and select: "VNX Support Forum" which would be the most relevant for this question.
Can I assume you have a Unified platform? Do you have Control Stations, data movers, and storage processors? The reason I ask is that the answer will need to account for all. For instance, DNS and NTP need to be set for each piece of equipment since they have external interfaces:
1) Unisphere Domain
2) Control Station(s)
3) Data Movers
The alerting (SNMP and SMTP) also will need to account for both block and file features if you have a Unified platform (and not just block or file).