GLOCKREAPER

updated

13 years ago

G

GLOCKREAPER

14 Posts

0

59805

December 10th, 2013 15:00

Dell Venue 8's micro SD card not mounting on start up.

Hello, I recently bought the new Venue 8 and so far it's been great except that the SD card does not mount when I reboot the tablet.


The card works well in all other respects, but having to remove and reinsert the card every time I need to restart the tablet is a pain.

Anyone have any ideas on how to solve this?

  • 2805

    0

    Posted December 22nd, 2013 10:00

    Hi, I noticed that too, what you can do is put the tablet to sleep for a minute and it finds the card, its definitely a compatibility issue, my old 1gb sandisk card mount instantly. the one that doesn't is a 32gb chinese one. I will buy a new one branded this time and I will let you know.

  • GLOCKREAPER

    14 Posts

    2805

    0

    Posted December 20th, 2013 20:00

    Nobody else experiencing this?

  • GLOCKREAPER

    14 Posts

    2805

    0

    Posted December 22nd, 2013 21:00

    Mine doesn't remount unless I remove and reinstall it.

    Thank you for your reply; it's good to know mine isn't defective.

  • GLOCKREAPER

    14 Posts

    2805

    0

    Posted December 23rd, 2013 20:00

    You were right.

    If you let it sleep for an indeterminate amount of time, it will recognize and mount the card.

    Thank you again.

  • MarcMarc

    37 Posts

    2805

    0

    Posted December 25th, 2013 15:00

    Glockreaper,


    I cannot remove my my MIcro SD card.  I followed the Venue 8's manual "NOTE: Make sure the cards are correctly aligned and are inserted all the way."  but I cannot remove it.  I have tried pushing it in a little more - expecting a spring to release it  - but nothing happens.  Am I doing something wrong?

    It is not a cheap Micro SD card but a Transcend model.

  • GLOCKREAPER

    14 Posts

    2805

    1

    Posted December 25th, 2013 16:00

    You have to use your fingernail to really push it in, then it will release and spring out.

  • MarcMarc

    37 Posts

    2805

    0

    Posted December 25th, 2013 17:00

    Thanks for a speedy reply.

    You are correct.  I used my fingernail and after a second or two, the card lifted just far enough (about a mm or two) for me to use another fingernail to lift it out.

    Sorry to ask another question but does your card move a mm or two or spring out enough allowing you to use your fingers - not fingernail - to remove it?

  • MarcMarc

    37 Posts

    2805

    0

    Posted December 25th, 2013 17:00

    Thank you very much indeed again. 


    I am relieved to hear that your experience is the same as mine.  I was beginning to wonder whether it was a fault requiring me to return it to Dell but I am much happier now!

  • GLOCKREAPER

    14 Posts

    2805

    1

    Posted December 25th, 2013 17:00

    You're welcome.


    It protrudes enough for me to pull it out with my fingernail...most of the time.

    I'm sure there are variances in SD card dimensions across the many manufacturers that will result in different experiences though.


    As long as you can get in and out, that's all that matters.