UNSOLVED

Tinto1970

updated

13 years ago

T

Tinto1970

6 Posts

0

26213

June 21st, 2013 09:00

Best Practices and questions about updating CMC firmware on M1000e

HI, i have bought a new M520 and i have to fit it in our M1000e where already are various M905, M710,M610,M710HD.

In the M520 package a tag was found, it says "before to install you must update the CMC firmware".

Currently the CMC is running 2.30.A00, now it's available 4.31. I've read the readme and the userguide but something it's not 100% clear:

  1. are there prerequisites about old blades' bios, iDrac versions and so on?
  2. it's better to update the standby cmc, test it, and then the former active cmc, or to update both in one single operation? User's guide at page 42 says "it is recommended to update both the CMCs to the same firmware version at the same time with a single operation."
  3. finally, is updating the cmc fw a "risky" operation than can cause service disruptions on blades already running? is wise to call a Dell tech to come and perform the operation?

thank you

  • steven_zessin_D

    1 Rookie

    •

    50 Posts

    908

    0

    Posted June 21st, 2013 12:00

    On behalf of the CMC team:

    1. There are no prerequisites to update the CMC firmware.

    2. It is recommended that both CMCs, Active and Standby, are updated at the same time.

    3. Updating the CMC is low risk operation. However, it is recommended to update the CMC firmware during a scheduled maintenance window

    Best Regards,

    steve

  • Tinto1970

    6 Posts

    908

    0

    Posted June 23rd, 2013 14:00

    thank you Steve for answering my questions so clearly and fast.

    However i'm slightly disappointed: i always thought that adding a new blade was a no-risk, "push inside and play" operation.

    With the "old" rack servers adding a new one requires a few hours of boring job with cabling rackmounting, and so on. But i don't have to wait for, or create, a "scheduled maintenance window".

    Thanks again for your attention.

    Alessandro