UNSOLVED

Ferry1

updated

17 years ago

F

Ferry1

35 Posts

0

1441

January 27th, 2010 01:00

wwn deleted from the vcmdb way to restore this?

Hello,

I used  symmask -wwn XXX delete -login to delete a wwn from the vcmdb, i would like to restore in the vcmdb.

Can someone help me with the required actions to take?

Thanks,

Ferry

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    1085

    0

    Posted January 27th, 2010 03:00

    i would try re-activating the zone set on the switch, see if it will force the host to log back in into the FA, also try rescanning disk on the host itself.
  • Ferry1

    35 Posts

    1085

    0

    Posted January 27th, 2010 03:00

    Dyna,

    Thats what was thinking about, but this server has direct connection to the DMX so not via the Switches :-(

    Ferry

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    1085

    0

    Posted January 27th, 2010 04:00

    rescanning for disks in the OS did not help ? (not sure what OS you are running).  Can you get into HBAs utilities (SanSurfer or HBAnywhere) and run a rescan there or some kind of diagnostics. Also try PowerPath, on Windows run "powermt check force hba=all" or Unix/Linux try "powermt config". We just want to tickle the HBA to log back in.
  • Ferry1

    35 Posts

    1085

    0

    Posted January 27th, 2010 06:00

    We are running AIX 5.3 TL 06, and yes the cfgmgr -l  fcs0 and powermt config didn't help...

    when i run the symmask command the WWN doesn't pop-up

    ferry

  • 1085

    0

    Posted January 27th, 2010 09:00

    Did you try 'symmask discover hba' This finds the HBAs on the host.

    As dyano suggested, running cfgmgr –vl fcsx should have worked.

    Can you elaborate on what HBA you are using. Qlogic or emulex?

  • Ferry1

    35 Posts

    1085

    0

    Posted January 27th, 2010 11:00

    The server was rebooted and as expected the wwn logged in again..

    Thanks,