does any one Have idea about The devices Created at new Installed DMX4 why when we choose it with certain capacity , 2 way mirrored protection it will be created with double size Capacity , we use ECC 6.0 to create that Also
the same ECC 6.0 used to create Devices on onother old DMx800 , but The same Issue Above does not appear , this lead me to proplem in DMX4 ?? does any one have Idea about That
The block size has doubled in the DMX-3 and higher from the previous versions. This means that an 18414 cylinder hyper in an older DMX array would be roughly 8.43 GB where an 18414 cylinder gyper in a dmx-3 and higher will be roughly 16.85 GB. So what you need to do is create the devices with HALF the cylinder size as you are used to.
So in this example, if you wanted to create an 8.43 GB hyper you would need 9206 cylinders.
It depends on tracksize that changed between old DMX and DMX3/4 .. Old DMX have 32k tracks while DMX3/4 have 64k tracks. Thus a DMX3 cylinder (the basic building block you specify while creating symdevs) is twice an old DMX cylinder.
I suspect you create symdevs choosing size in cylinders
Probably you've found a bug .. or simply your ECC needs a FIX ...
However if you look at your options file (located in /var/symapi/config on unix or in X:\program files\emc\symapi\config on win$ows) you'll easily find an option:
SYMAPI_TRACK_SIZE_32K_COMPATIBLE
By default S.E. 6.5 DISABLES silent translation between 32K and 64K tracks. But your ECC don't know about that and always translate 8Gb in 18414 cyls, regardless of underlying storage, relying on S.E. to do the magic. But your S.E. 6.5 won't do the magic and thus you have devices double in size.
Please enable this option in options file to fix the behaviour.
But I create Volmes using ECC 6.0 and Symcli 6.5 , any Way I creat devices not through Cylender but through Size of MB I choose 8 GB not 16 GB ?? could you explain
Guys i opened a case of this Bug and they told me to view this case emc145461 where i can find those patches ??
patch 4332 (Symmetrix/SDM/Java) 6.0.0.0.548) and Solutions Enabler Patch 1307 fix this issue for ControlCenter 6.0. Please contact the EMC Customer Support Center is you require these patches.
Dear Stefano Del Corno i did change the value to enable and it worked ...but will it affect my previous devices???? "please see emc145461" should i just change the parameter is it safe
Usually if you need a patch/fix, you are asked to open a SR and quote the primus .. If your existing SR is still open, quote the SR and tell that you need to receive the software/fix/patch mentioned in the primus.
Message was edited by: Stefano Del Corno
This post is mine ... I was logged on with the wrong ID .. forgive the confusion.
tonydcdi-ymiT1
70 Posts
374
0
Posted November 6th, 2008 05:00
The block size has doubled in the DMX-3 and higher from the previous versions. This means that an 18414 cylinder hyper in an older DMX array would be roughly 8.43 GB where an 18414 cylinder gyper in a dmx-3 and higher will be roughly 16.85 GB. So what you need to do is create the devices with HALF the cylinder size as you are used to.
So in this example, if you wanted to create an 8.43 GB hyper you would need 9206 cylinders.
Hope this helps