UNSOLVED

sbga01

updated

18 years ago

S

sbga01

27 Posts

0

5266

September 19th, 2008 04:00

TS-H653b DVD burner in Inspiron 531 won't burn dual layer

Sometimes it can get up to 25% then fail, most of the time it only gets to %5 or so. Only does it on dual layer. What should I do?
  • osprey4

    6 Operator

    •

    34230 Posts

    434

    0

    Posted September 19th, 2008 11:00

    Hi, sbga:

    DL media are the most problematic for just about any DVD burner, and the layer break is the most problematic issue for all DL media and writers. Let's start by finding out who your discs are actually made by (not the brand). Grab DVD Identifier (link below) and get the media code. The ones I recommend avoiding in particular are anything from CMC or Ritek.
  • sbga01

    27 Posts

    434

    0

    Posted September 19th, 2008 18:00

    They are ritek(memorex), but I dont think the media is the issue because I tried burning one of them in another computer, and it worked. My burner failed on 3 of the discs
  • osprey4

    6 Operator

    •

    34230 Posts

    434

    0

    Posted September 19th, 2008 23:00

    There is a fairly recent Windows/DOS firmware flash update for TSST TS-H653B HH SATA 16X DVD+/-RW. See if that helps.

    I see two Ritek DL discs branded as Memorex. The Ritek D01 (2.4x +R) is hitting well under .500 among reviewers (very high PI and PO errors). There is also a Ritek S04 (8x +R) that seems to be better.