UNSOLVED

gerry_murray

updated

23 years ago

0

871

April 13th, 2004 14:00

Successful 160GB installation - before complete click of death

Well, I have to take my hat off to Western Digital.

My current Maxtor 80GB drive was giving me the periodic "click of death" so before the stinkin' thing totally died ..I got a 160GB WD1600JB Caviar on ebay. (I think I paid 90 bucks for it ...brand new n' all).

The package came with a WD "installation" CD which was VERY user-friendly.

The gist was that I attached the blank WD160 to the secondary IDE cable and booted up as normal. Once I had a system I installed the WD software from the CD and rebooted (after taking it out).

Upon reboot - even tho' I've SP1 installed and the latest Dimension 8200 bios (A09) - the WD software STILL said that it needed to make some registry adjustments so that the o/s would be able to identify/read ALL of the drive and not just 137GB. So it made the reg change and I rebooted again.

Upon reboot the WD 'installation' software automatically started and this is where it was literally a case of 'press buttons' and go and have your dinner. I kid u not. VERY impressive!

I clicked on the 'install drive' button and chose to use one large 160GB partition and for the drive to be used as a system disk ...not just as 'additional storage'.

Formatting took just over an hour.

I then clicked on the 'copy over your files' button and it literally siphoned/copied all my files (from the still operating maxtor 80Gb drive) ...**including** "hidden" and "system" files over to the new 160GB drive ..giving me the ubiquitous "horizontal bar" so that I'd be able to 'see the progress' and know whether to sit there like a bump on a log - staring at the screen - or go downstairs, eat my dinner, watch Seinfeld on TBS and come back up later on.

50 odd minutes later it had _copied_ the 40 gig of 'operating system' and 'installed software' that I have on the 80GB maxtor.

I took out the flaky maxtor, set the jumper on the 160Gb to 'master',  installed it in the bay and rebooted.

It was like I had not done anything to the machine at all ...EVERYTHING STARTED UP AS NORMAL with NO silly "missing DLL" messages or "cannot find this that or the other" etc. etc. type messages that we've all seen when we try to 'upgrade' things.

.....'cept now my primary boot drive is now a RELIABLE 160GB drive! And because it _copied_ the files over, rather than taking an 'image' of the sectors ...now all the files are in *contiguous* blocks ...so, yes, read-access is just a little bit faster than before ...even tho' I did have the maxtor 'defragmented' ...there's nothing that beats a drive with contiguous blocks.

So there we have it folks, "upgrading" your drive from a lower capacity to a higher capacity and STILL having everything working 'just as before' (if not better) CAN be done ...and IMHO the prize goes to Western Digital.

Gerry

 

 

 

 

  • shesagordie

    12 Elder

    •

    46017 Posts

    91

    0

    Posted April 13th, 2004 15:00

    gerry_murry.

    Congratulations.

    Bev.