UNSOLVED

petomane

updated

22 years ago

P

petomane

14 Posts

0

12081

March 16th, 2005 15:00

Just can't write dvds with my Sony DVD+-RW DW-D56A!

I'm just getting to grips with my new Dell Inspiron 510E, and am having great difficulty in trying to burn data to a DVD disc.

The DVD writer in question is a Sony DVD+-RW DW-D56A, and the software is Sonic RecordNow! v.7.3.

When I load a "Ritek G04 DVD-R 4x", it's recognized by Control Panel, showing no size. After taking the "format" route, it shows up as 4.08GB. It's when I come to try burning a disc that the problem arises.

Sonic RecordNow! shows "DLA disc 4183MB free". When I've selected my data and go for "burn", I get the following message -

"Please insert a blank or rewriteable disc into the DVDRW 9 (D) drive"

When I eject and reinsert the disc, I'm greeted with "Please insert an appendable data disc and try again". I just can't get the dratted thing to work.

When I've tried "Datasafe DVD-RW 2x", it doesn't even recognise the disc in the first place!. I have managed to burn cd discs, but NOT DVD, and Dell Diagnostics reports the Sony DVD writer as ok.

Maybe this is a software problem or, in my ignorance, I'm just overlooking something very basic.

Any help would be very much appreciated as I'm trying to get a "TrueImage" of my drive on DVD so that I can reformat and partition my hard drive. Most frustrating...

~~~~~~~~~~~~~~~~~~~~~~~~~
Dell Inspiron 510E
40GB hard drive - 512MB RAM
WindowsXPhome.sp2
  • osprey4

    6 Operator

    •

    34230 Posts

    200

    0

    Posted March 16th, 2005 16:00

    petomane:

    Three things. First, I suggest not using DLA at all. You will likely be better off uninstalling it entirely.

    Second, you cannot use a DVD±R (either format) for DLA. Only DVD±RW. Now that you've "formatted" the disc, it's a coaster. Regarding "Datasafe" brand discs, it might be worth checking them out on this forum:

    http://www.videohelp.com/dvdmedia

    The feedback from other users is not promising.

    Finally, you may want to post further questions in the Inspiron forum.

  • petomane

    14 Posts

    200

    0

    Posted March 17th, 2005 18:00

    Hello Osprey,

    I guess my mistake was in formating - though I only tried that after all else had failed. After binning the coasters created by yesterday's debacle, I tried again today (minus the formatting!), and it actually worked. A prime example of Sid's Law (my expletive-deleted" filter just kicked in). Perhaps the fact that I was trying to burn the disc from inside the TrueImage program had some bearing on it...

    I did this using a fresh "Ritek G04 DVD-R 4x", so DLA DOES work with DVD-R media. I didn't bother trying with the DVD-RW disc, as I don't need to rewrite.

    Now that I've got a "TrueImage" of my Dell default set-up on a disc, I can start partitioning and installing WindowsXPhome. Then I'll undoubtedly ditch Sonic RecordNow! and DLA. I've got Nero 5.5 on my old system, but I can find no reference to DVD burning on it. As most people seem to use Nero, would you know if the full version of 5.5, or the OEM (suite 1) of Nero 6 burn DVDs?

    I actually posted this in the Dimension forum by mistake, and then reposted it in the Inspiron forum. I'm lucky that you responded here, as I've had no replies at all on the other forum....

    Still, it works now, and your help is very much appreciated.
  • osprey4

    6 Operator

    •

    34230 Posts

    200

    0

    Posted March 18th, 2005 10:00

    For DVD burning, you'll want to get Nero 6 Ultra. It's a little pricey but you get full value for your investment. There's a version called Nero OEM Suite, but this is a stripped down version sold with hardware only. The full version has all the bells and whistles, including, most importantly, VCD, SVCD and DVD video encoding that the OEM Suite does not have.