Inspiron 6000 - Need clone image of diagnostics partition
Hi ,
I recently helped my girlfirend migrate from a fujitsu 30 gig,...to a western digital scorpio 2.5" 80 gig drive.
I cloned the whole disk with acronis true image 8, capturing the diagnostic partition at the beginning and the restore partition at the end. ANd transfered the clone sucessfully to the western digital kepping the original size of the 2 hidden parttitions.
The old fujitsu was formated.
I know i should have backed up the "diagnostics partion" image, but i didnt.
And after fiddeling with the new western disk i ended up with deleting the diagnostics partition.
Now i am at loss.
Could some kind soul,.. image the diagnostics partition of a dell inspiron 6000 (its very small) and send it to my server.
I would be utterly greatful as i hate the thought of having messed up her possibilities to diag the laptop incase of problems.
Error Acessing utility partition while updating delldiag.ini file.
Code 709
I created a FAT32 partitionand change the type of that first partition from 0xBE (FAT32) to 0xDE (Dell Utility partition)
It is ofcoarse empty however, since i dont have the original contents of it with the diagnostic software that its supposed to contain.
From the error message i take it cannot update since it has nothing to update.
I think my only option is to get an actual image of the partiton with its contents.
Now what i would really like to know is if the "dell Systems and Utility" cd wich u can boot from into dell diagnostics, contains the exact same as the dell diag partition.
DELL DRIVER CD:\DIAGS\INSP32\A1249
since it contains "delldiag.ini " in folder: \A1249
If its the exact same i can easily copy the contents to the dell diag part ni id mode 0xBE (FAT32) and there after change it to 0xDE.
I am going to try that, if the update works then i hope i was sucessfull. I still wonder though if the cd has the exact same diag software as the dell diag partition.
Upd. Tried that, but wont update,..so i guess no sucess,
ok i have made the image and put it on my new 60/7200 drive on my I6000 and it works like it should. if you have a clean not partition drive and have ghost boot disk I could e-mail you my image.
Is there any chance u can add a CRC verification file, *.md5 to the image ,...so i know nothing has been corupted in the data transfer? but not totally nescesary ofcoarse.
You may have experienced a problem because the 'DE' type DellUtility partition is supposed to be a FAT16 or FAT16x depending if it is under or over 32Mb in size, not a Fat32.
jasonrexxx
75 Posts
429
0
Posted April 11th, 2005 22:00
go to this site:
http://support.dell.com/support/downloads/devices.aspx?c=us&cs=19&l=en&s=dhs&SystemID=INS_PNT_6000&category=0&os=WW1&osl=EN
download
Dell 32-bit Diagnostics Utility Partition Contents Upgrade Tool