UNSOLVED

funwithit

updated

24 years ago

F

funwithit

6 Posts

0

20468

April 19th, 2003 02:00

i8500 Can I put a 9.5mm HD into media bay for disk imaging?

I want to use a 2nd drive (fujitsu 20gb 9.5mm) to clone my OS partition. Would the 2nd drive work in DOS mode when I run Partition Magic?

My 8500 is coming next week.

  • rickmktg

    2 Intern

    •

    11898 Posts

    791

    0

    Posted April 19th, 2003 12:00



    @funwithit wrote:

    I want to use a 2nd drive (fujitsu 20gb 9.5mm) to clone my OS partition. Would the 2nd drive work in DOS mode when I run Partition Magic?

    My 8500 is coming next week.




    Yes it will work fine.  Make sure it's you put it in prior to booting into Partition Magic.
  • 791

    0

    Posted April 19th, 2003 17:00

    This is for rickmktg.  I have a hitachi 20 gig hd in my primary bay.  I want to do the same as you did by purchasing the same 40 gig as you have.  I guess my question is, what do I need to purchase other than the hd.  I will want the 20 gig in the open bay as you have.  I have a Hitachi DK23CA 20 gig that came with my 8100 in the primary bay now.  I guess I want my hd setup just like yours.  I have XP Home Operating system.
  • rickmktg

    2 Intern

    •

    11898 Posts

    791

    0

    Posted April 19th, 2003 19:00



    @stealth2920 wrote:
    This is for rickmktg.  I have a hitachi 20 gig hd in my primary bay.  I want to do the same as you did by purchasing the same 40 gig as you have.  I guess my question is, what do I need to purchase other than the hd.  I will want the 20 gig in the open bay as you have.  I have a Hitachi DK23CA 20 gig that came with my 8100 in the primary bay now.  I guess I want my hd setup just like yours.  I have XP Home Operating system.

    You need the modular bay holder and 4 screws. 
    Courtesy of JohnAllg:

    I8K-8.1K-8.2K, I4K-4.1K, I3.8K Media Bay parts: 4169D = carrier; 4 x 53965 = screws | $32.00 for 12.5mm drives
    I8K-8.1K-8.2K, I4K-4.1K, I3.8K Media Bay parts: 29MFN = carrier; 4 x 53965 = screws | $32.00 for 9.5mm drives
    I7.5 Media Bay parts: 4124T = carrier, 11 x 3771U = screws | $32.00 (holds 9.5 and 12mm drives but not 19mm).
    Internal Carriers: 4x00 - 480WV $4.95, 8x00 - 48CVX $4.95, 2650 - 4J294, 3700 - 84993, 40-pin conn. - 8267R $4.95, 4 screws - 6350E $.05


    Dell Spare Parts - 1-800-624-9896
  • Bay Wolf

    4438 Posts

    794

    0

    Posted April 19th, 2003 19:00

    Does the I8500 have the same media bay size as the rest of the 8x00 series?  I wasn't sure so I retracted my earlier post.

     

  • rickmktg

    2 Intern

    •

    11898 Posts

    794

    0

    Posted April 19th, 2003 20:00



    @Bay Wolf wrote:

    Does the I8500 have the same media bay size as the rest of the 8x00 series?  I wasn't sure so I retracted my earlier post.

    I read that Stealth2920 had an I8100 and was asking the question about being the same as my 8100. 

  • Bay Wolf

    4438 Posts

    794

    0

    Posted April 19th, 2003 23:00

    I didn't see the I8100 in his post.  I quickly read it and associated it with the subject - I8500. 

    Anyway, my question still stands, Does the I8500 have the same media bay size as the rest of the 8x00 series?

     

  • johnallg

    2 Intern

    •

    7280 Posts

    794

    0

    Posted April 21st, 2003 01:00

    I thought the new notebooks all used different media bay carriers than the existing notebooks.  That was one complaint when the new lines came out.
  • Rollie_R

    2 Intern

    •

    2248 Posts

    794

    0

    Posted April 21st, 2003 19:00

    All,

    Thank you for using the Dell Community Forum.

    The Inspiron 8500 uses the new D-bay drives that are used on the 600M, and the Latitude D600 and D800.  These are not compatible with any older Inspiron or Latitude systems.

     

  • rickmktg

    2 Intern

    •

    11898 Posts

    794

    0

    Posted April 21st, 2003 20:00


    @DELL-Rollie wrote:

    All,

    Thank you for using the Dell Community Forum.

    The Inspiron 8500 uses the new D-bay drives that are used on the 600M, and the Latitude D600 and D800.  These are not compatible with any older Inspiron or Latitude systems.

    Not even if we push hard? 

    Thanks Rollie.

    John - you need to update your sig again... 

  • johnallg

    2 Intern

    •

    7280 Posts

    238

    0

    Posted April 21st, 2003 20:00

    Need Data!!!  Must have numbers!! 

    Haven't seen any part nubers posted yet.