I added an external SATA to my Dimension 8400 by extending port 3 to the back of the PC but, I am having troube with the BIOS settings for Boot sequence. For some reason, the external SATA becomes my Primary Boot device every time I power up the external SATA. My question is has any one connected an external SATA drive this way? could it be that it is not possible to extend the motherboard SATA port to be used with an external drive?
Thanks for the reply. Yes, the PC tries to boot from the ext sata but, it is not a bootable device. I tried all possibilities that i could think of; powered up the external sata first then the pc. powered up the ext sata and did a restart on the PC and etc. In all cases, the boot sequence changes to the ext sata as the first choice and Drive C goes to the bottom. Of course, the PC will recognize the ext sata only during boot up. If I restart while ext sata is powered up then hit F2 to fix the boot sequence, every thing works fine and i am able to access the ext sata. If i do restart the pc while ext sata is still powered up, then the boot sequence get messed up. The same problem occurs when I used SATA port 1 instead of 3. If I fix the boot sequence and power off the ext sata the PC behaves ok. So in short, the only way I can use the ext sata is to get into bios every time to fix the boot sequence. BTW, of course, I do save the bios settings before exiting but, it matters not.
I don't have an answer to your problem. I am also interested in moving some storage SATA drives out of the case. Could you please explain what cases you have the external drives in, how they are powered, and how you manage the passthrough with your SATA cables?
both enclosures behaved the same. I prefer the 1st choice because, it has a wide fan and is les expensive but, it does not have a USB port.
I am looking at two possibilities to solve the issue with the boot sequence a) to get a PCI-SATA card and connect to it instead of the motherboard ports or b) Get an internal (mobile) enclosure to fit it in a DVD player slot and use the PC to power it.
Well, I have exhausted all possibilities to solve the issue of BIOS Boot sequence being altered when the external SATA is connected to the MB SATA ports when the ext SATA is powered on/off. The solution was to add a SATA-PCI card, now the problem is no more. It was well worth spending 20.00 on a Buslink PCI-SATA adapter.
Bottom Line, the Dimension 8400 does not allow extending the sata ports on the mother board to the external world.
mombodog
2 Intern
•
12735 Posts
270
0
Posted August 4th, 2005 21:00
1. Are you powering the external drive first, then the PC?
2. Does it try to boot from sata3? does it give an error when it attempts to boot from this non-system(?)disk?
Message Edited by mombodog on 08-04-2005 05:44 PM