Dvd not not recognised at boot time and seen as floppy B in My computers
Hi,
I have two questions:
Foremost is my Latitude CPx that comes up with this error message while booting" drive 1 seek failure(DVD/CDROM). However, in XP device manager, It is recognised under "+Floppy drives" as the second floppy drive Instead of appearing under "+DVD/CDROM" which is conspicuosly absent. It also came up as the second floppy drive "B" in "My computer". That is the situation whether it is connected externally or internally. I have not been able to use it for any installation even though it was recognised and worked perfectly on a similar Latitude CPx. I have tried flashing the Rom with the latest without solution.
Secondly, How do I disable the password on the board of a laptop. A buddie sent one to me with the board passworded. I know I'll just diable the CMOS battery and the jumper, power up and the fix the stuffs back if it were to be a desktop. How do I fix this on this laptop.
Awaiting your professional and solution driven replies
"You must use the Cable Marked 10NRN not the floppy cable on the media bay".
Can you please elucidate on what the above is suppose to mean? Media bay, to me, is the swappable slot for either CDROM/DVD or Floppy on the Latitude.
The problem is that whether I am connecting externally of internally, it is stil detects the CDROM/DVDV drive as floppy drive B while bringing this error message at boot time "drive seek1 failure"
speedstep
11 Legend
•
46969 Posts
219
0
Posted May 6th, 2004 23:00