Dimention 8400 weird hard drive connectors- what can I install as far as an
extra DVDROM?
Before I bought this Dimention 8400 I upgraded my old comp with 2X 120GIG Maxtor drives (I put my whole 2,000 CD collection on them as well as video footage). I finally just went for the gusto and bought myself the Dimention 8400 recently and went to install the 2 X 120GIG Maxtor drives only to see the Dimention 8400 uses strange/new(?) wire connectors? Is this Dell's way of making sure we only buy DELL drives and hardware?
I have 1 CD-RW drive and 1 DVD-RW drive. I've made personal DVD's and realize how much easier it would be to just install a 3rd DVDROM drive to play the master copy so I can just dub copies that way instead of having to go through the whole process of "creating" a whole new DVD.
Doing research on Dell.com, it seems to me that there isn't a simple and cheap DVDROM I can buy and install for the Dimention 8400 or am I mistaken?
Thanks for any help!
PS (I already went to Fry's and CompUsa and both told me there were no adapters so that I could have installed those drives into the Dell.. one store told me it's brand new technology and I was "S.O.L." in not so many words)
The Dimension 8400 "strange/new(?) wire connectors" are the Serial ATA connectors. The two CD Drives you have are likely on the IDE channel. You can add new Serial ATA devices (newer technology) or you can obtain a PCI card that will give you more IDE ports that your 120Mb hard drives can connect to. However, you only have two bays for 1-inch high hard drives internally and one is used buy the main hard drive.
As far as a DVD-ROM is concerned, you can use any standard drive available from any seller ($20-30). Again, you must consider how you will hook it up.
>>As far as a DVD-ROM is concerned, you can use any standard drive available
from any seller ($20-30). Again, you must consider how you will hook it up.>>
Ok, that's good to know since I only need a cheapo DVD *player*.
Since the Dell uses the new Serial ATA devices only, and apparently I can't purchase a DVD-ROM that uses ATA connectors, am I assuming correctly that my only other choice is to buy a PCI Card with some IDE ports? Of course I'm excluding the option of an external DVD-ROM which I do not want.
Just an idea. I don't have a floppy drive. The ribbon cable and power cable that's used for the floppy look exactly like hard drive cables. Couldn't I just use those to connect the extra hard drive if I set it to slave?
gimletgoop,
If you really want to put in that DVDROM, have an available drive bay, and are willing to spend bucks, there are combo PCI ATA+Firewire cards available, but you'll have to pull out the existing Firewire card to free up a slot.
A quick look around the net found: http://www.mycableshop.com/sku/PCI1394RAID.htm
I know nothing about this vendor or the card, and it's pricey at $400, so use it as an example of what's out there and do some homework. You might want to look for one that's ATA133/100/66 + Firewire, which will work with newer/faster drives, but I don't know that such a beast exists, and make sure you know what ATA specs the DVDROM needs.
Just don't buy a SATA (serial ATA) + Firewire combo card, because that's NOT what you want to hook up your DVDROM. If you do, you'll only end up with more of those 'weird hard drive connectors', as you called them.
Serial ATA to IDE adapters are cheap at $17.49 each. You use your SATA connectors on your motherboard (they gave you 4 of them) and don't need to replace a PCI card.
Everyone has old IDE drives, and some people keep pushing PCI IDE cards. What a waste. You have 4 spaces for 3 1/2" drives and 4 SATA connectors. Use them.
Madkiwi- THANK YOU! See? This is what I was looking for at Fry's and CompUsa. I keep seeing links to newegg.com on just about every computer-related board I visit. I'm not too worried about ordering from them as they seem very reliable. Although this part seems pretty "man-made" so to speak, I'm guessing it'll work just fine.
Thanks again! Cuz the thought of spending 2 hours re-burning each of these home video DVD's I make is not a thrilling one :P
Re-opened the case to take a look-around again and here's the sitch:
I can use this adapter from newegg to install a 2nd hard drive since there is a slot for it and cables for it.
I cannot, however, install a 3rd CD/DVD drive because the only 2 slots left look like smaller floppy/zip slots. There is one ribbon cable marked for a floppy drive.
Where would I put the 3rd drive then? And where would the power/connection come from?
I already have the CD-RW and the DVD-RW installed which are taking up the 2 slots.
Skybird
1 Rookie
•
10871 Posts
414
0
Posted December 20th, 2004 17:00
connectors. The two CD Drives you have are likely on the IDE channel.
You can add new Serial ATA devices (newer technology) or you can obtain
a PCI card that will give you more IDE ports that your 120Mb hard
drives can connect to. However, you only have two bays for 1-inch high
hard drives internally and one is used buy the main hard drive.
from any seller ($20-30). Again, you must consider how you will hook it up.