I would think not as you wouln't have a driver for your TV.
Dell Dimension 8200
512 Rambus Ram
40 Gig HD
1.9 GHz processor
64 mb nvidea G Force Ti 200
Windows XP home edition
Voytera Turtle Beach soundcard
Logitech Optical Mouse & Keyboard
Harman/Kardon 695 speakers
Samsung DVD
LITE-On-LTR CD-RW
Panda Titanium AntiVirus
Zonealarm Pro
HP Officejet v40 printer
Actually, yes you can. I personally have not done it, so I don't know the steps involved in doing it, but one of my friends does it with one of those flat TVs that hang on the wall.
I know you'd need a video card with an S Video port on it, making sure the TV has one as well. I have a GeForce4 TI 4600 I upgraded to on this computer, and while I don't use a TV as a monitor, I DO use dual monitors with it, using a Digital>AGP adapter for the monitor's cable.
BTW: Generic monitor drivers usually work for a TV, it's not like you need special ones. I mean, you can run your monitor you use now using generic drivers, but you won't get the wanted color depths and resolutions. The drivers just bring out the features, basically.
Get to the point. Yes you can use a televison as your monitor as long as you have a video card with a tv out. go to compusa or office depot and get one for $30. Plug your somputer to the tv and cabam. its not too hard.
Can be done, though resolution at best is 600x480, picture quality is poor. I've found the only benefit is running DVD movies from PC to TV if you do not have a DVD player already hooked up to your TV. The cost of a good video card is more than a good flat screen CRT monitor. Back to answering your original question, yes you can set up a TV as your default monitor. You will find that qality when using MS Word or other resolution intensive program will be sub par. JD
Dell XPST700r>PowerLeap PL-iP3 T 1300
Upgraded 4/23/2002
WinXP Home Edition
768 MB ram non-ECC
Gainward GeForce 4 Ti4200 Golden Sample 128 MB
Drivers 29.42 EXPERTool for card clocking
Western Digital 120 GB ATA 100 7200 RPM 8mb cache
Western Digital 30 GB ATA100 7200 RPM 2mb cache
SoundBlaster Live! Value OEM
Harmon Kardon 595 Speakers
Dell Optiplex GX1 Pll 350>Plll 700>PL-iP3 T 1200 Upgraded11/27/01
XP Home Edition
768 MB ram non-ECC
ATI Radeon PCI 32 MB
Maxtor 40 GB ATA 100 7200 RPM
Turtle Beach Santa Cruz Soundcard
Logitech Z-540 Speakers
What if I have a video card with S Video, but a TV with just coaxial? I'm trying to run the S Video through a video source selector, which has S Video input, then through an RF modulator, which has coaxial out.
So far no signal, but I was hoping there might be something more I could configure to make it work.
Not to intrude on this thread, but your question might get a more informed answer in the video forum. It would also be helpful if you included some details about your hardware (PC, video card and TV).
In general, TVs make poor monitors, but there are far too many variables to say it cannot be done with your specific set-up.
pofolks4
140 Posts
830
0
Posted August 3rd, 2002 22:00
Dell Dimension 8200
512 Rambus Ram
40 Gig HD
1.9 GHz processor
64 mb nvidea G Force Ti 200
Windows XP home edition
Voytera Turtle Beach soundcard
Logitech Optical Mouse & Keyboard
Harman/Kardon 695 speakers
Samsung DVD
LITE-On-LTR CD-RW
Panda Titanium AntiVirus
Zonealarm Pro
HP Officejet v40 printer