UNSOLVED

Maverick115

updated

20 years ago

M

Maverick115

1 Rookie

•

38 Posts

0

11118

October 12th, 2006 07:00

Can an XPS 410 mount a PATA Hard Drive without an adapter card?

I just got my XPS 410 and I'd like to mount one of my old PATA IDE hard drives in it (as a second HD and as a means of transferring all my stuff over to it).  The problem is that there don't seem to be any connectors for PATA drives (I already gave up on transferring my PATA floppy and DVD ROM drives).  First there is the power problem - there is no way to get the only molex connector over to the hard drive mounts at the bottom of the case - a problem I solved by ordering this:
 
Second, there are no PATA IDE cables in the box.  However, at the very bottom of the case right where the hard drives are there is, on the motherboard, something that is definitely 100% without a shadow a PATA IDE socket.  The problem is, I don't know if I can plug my hard drive in it and have it recognized and function.  I can't test it until my power adapter gets here.  So, does anybody know if I can plug my hard drive into that, or do I definitely need an adapter? 
  • krdomingue

    181 Posts

    274

    0

    Posted October 12th, 2006 11:00

    No.

    There is no ide socket on the motherboard. What you are probably looking at it is the floppy drive cable socket. Simular, but with less pins.
  • Maverick115

    1 Rookie

    •

    38 Posts

    274

    0

    Posted October 12th, 2006 20:00

    OK, so I ordered one of these: 
     
    3 Questions:
    First, if anyone happens to know, what is the difference between the blue port and red port?  Which one should I connect my Hard Drive to? 
    Second, will the IDE adapter consume a significant amount of power? 
    Third, do I enable this and the HD in BIOS or just install Windows drivers? 
     
    Thanks. 
  • Maverick115

    1 Rookie

    •

    38 Posts

    274

    0

    Posted October 12th, 2006 21:00

    Thanks for the info (I should have looked harder for that manual /smackself).  One more thing though.  Since I'm plugging the hard drive in through an adapter and not through the motherboard, how do I enable the Hard Drive in BIOS? 
  • krdomingue

    181 Posts

    274

    0

    Posted October 12th, 2006 21:00

    According to the owners manual the red is ide1 and the blue is ide2, meaning you use the red one first:

    http://www.rosewill.com/RosewillSoftware/RC208_user_manual.pdf

    Not sure about your second question, but I doubt it will cause you any issue. Hard drives are not normally that power hungry.

    For optimal ussage, you want to install the software drives and enable the drive in the bios.

    Message Edited by krdomingue on 10-12-2006 05:08 PM

  • Majestic

    2 Intern

    •

    9371 Posts

    274

    0

    Posted October 13th, 2006 15:00

    If you attach a hard drive to a controller card then the card's BIOS will then manage the drive and not the system's BIOS.  There is nothing to enable in the system's BIOS for the added drive.
  • krdomingue

    181 Posts

    274

    0

    Posted October 13th, 2006 15:00

    Be honest, It has been a long time since I have tried to add an IDE drive with a expansion card. All I can suggest is that you follow the directions that come with the card. If you run into problems, come back to the forum and seek addtional help.
  • Maverick115

    1 Rookie

    •

    38 Posts

    274

    0

    Posted October 13th, 2006 20:00

    That's what I thought.  Thanks.