If you want to reset a cluster, you could break replication, then run the clear_settings command and then delete the Repository volume. (for each cluster)
Maybe we can take a step back, and find out what your goal is ? Do you want to start your RP environment again from scratch or just remove RPA's from the config , or ??
If you need to redeploy, as mentioned above, you can detach all RPAs and rerun the installation process using Deployment Manager (you will be able to select a different repository volume as part of that).
If you are considering to perform that entire process in order to change the repository volume (for array replacement,etc.), then you should know that there is a non-disruptive Repository Migration Procedure. I would recommend that you contact your account team if you need to use this procedure.
Yes, detach both RPA's using the boxmgmt acct and delete the Repository Volume from the Unisphere GUI.
Probably a bit of overkill with the improved task functionality in Deployment Manager, but I like to 'deconstruct' before redeploying existing hardware.
brettesinclair
2 Intern
•
715 Posts
3358
0
Posted January 12th, 2015 03:00
Just the RPA not the cluster ?
If so, login as boxmgmt and detach the rpa from the cluster, reboot it and go into the RAID config and reset it.
You'll then need to re-install from the DVD..