UNSOLVED

bpdfs

updated

2 years ago

B

bpdfs

1 Rookie

•

7 Posts

•

2 Points

0

393

August 30th, 2024 13:37

Dell R330 Question --Trying to upgrade bios,idrac via flash Drive.

SO we have a bunch of Dell R330 servers... I am in the process of updating Firmware... Most are being done via Dell OME... But ones I have here physically like spares or ones we pulled out I used a flash drive to upgrade the Bios..

Most all have 2.11 and I'm trying to update to 2.20... Most i can do just fine no issue with the bios or Idrac update via flash drive and using Lifecycle Controller..  I cant seem to figure out why i have no issues with some and than get the issue as in the photo below.. Has anyone seen this? I know how to do this process fine just doesn't make any sense why some pop up with this and others no issue at all.. any help would be greatly Appreciated.  

But some i get the attached photo...

(edited)

  • DELL-Rey G

    4 Apprentice

    •

    1068 Posts

    0

    0

    Posted August 30th, 2024 17:32

    Compare the idrac versions of the systems that do let you upgrade to the systems that dont let you upgrade. 
    There is a split where the older idrac versions dont let you update packages to the latest version without an interim step.
    I want to say its in the 2.5x.x.x or 2.6x.x.x range. 

    Rey
    #iwork4Dell

    (edited)

  • DELL-Young E

    Moderator

    •

    5421 Posts

    •

    37 Points

    0

    0

    Posted September 2nd, 2024 00:28

    Hello, I suggest you reset idrac, please see below.

     

     

    https://dell.to/47hwope

     

     

    Let us know if you have any further questions.

    Respectfully,

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • bpdfs

    1 Rookie

    •

    7 Posts

    •

    2 Points

    0

    0

    Posted September 3rd, 2024 12:21

    Reseting the IDRAC does nothing... This is a BIOS Update.. Not idrac.... Granted the IDRAC update does the same thing..

    all of the BIOS are 2.11 and I just upgraded a handful with same Bios of 2.11 with no issue...

    and i am using a flash drive, no network connection, Just local... 

    (edited)

  • bpdfs

    1 Rookie

    •

    7 Posts

    •

    2 Points

    0

    0

    Posted September 3rd, 2024 12:56

    Something i Just noticed which is SUPER WEIRD.. SEe pic.

    You can see the IDRAC but the BIOS Version is not in there??? I have not seen this, Usually when you go in you see a lot more versions than what is in this pic?

  • DELL-Chris H

    7 Practitioner

    •

    9682 Posts

    •

    48046 Points

    0

    0

    Posted September 3rd, 2024 13:53

    The list you are showing is the devices with available updates, so if you had updated or if it is beyond the update level found in the catalog you are using, then it wont be listed. 

     

    DELL-Chris H

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • bpdfs

    1 Rookie

    •

    7 Posts

    •

    2 Points

    0

    0

    Posted September 3rd, 2024 14:50

    no.. the tab I clicked is "current Versions" so it should show everything.. and the current BIOS is 2.11 and the latest is 2.20....

  • DELL-Rey G

    4 Apprentice

    •

    1068 Posts

    0

    0

    Posted September 4th, 2024 15:18

    @bpdfs​ please give this a try. SSH into the idrac IP, then run: racadm getsysinfo
    It should show you the bios version in the System Information section. 

    Rey
    #Iwork4Dell

  • bpdfs

    1 Rookie

    •

    7 Posts

    •

    2 Points

    0

    0

    Posted September 10th, 2024 17:19

    I know the version. its 2.11... that is not the issue..

    Im trying to upgrade it to 2.20... and i get the pic above...

    When you do current version, not everything shows up like it should...

  • bpdfs

    1 Rookie

    •

    7 Posts

    •

    2 Points

    0

    0

    Posted September 10th, 2024 17:29

    See this pic.. this is what should show.... on the servers in question as above you see you can't see all the information......makesense?

  • bpdfs

    1 Rookie

    •

    7 Posts

    •

    2 Points

    0

    0

    Posted September 10th, 2024 17:30

    @DELL-Rey G​ the servers in question are not showing all versions in the lifecycle controller.... That is why i cant update it, because it doesnt show it and i do not know why