UNSOLVED

fillossofer

updated

14 years ago

0

9791

July 2nd, 2012 14:00

V515w Loses Communication between jobs

I don't use my printer very often, so about 90% of the time I try to print across my wireless network, I get a communication error.  I suspect it has something to do with my wireless router and the DHCP settings.  Does the lease expire on my printer's connection or something?  Is there a way to set up the router so that it reserves a specific IP for the printer and the connection is more reliable?  As it is, I nearly always have to connect using the USB cable, or cycle power to the printer in order to restore the wireless connection, which defeats the purpose of having a network printer.  

Thanks in advance.

Roger 

  • PudgyOne

    11 Legend

    •

    30315 Posts

    •

    106638 Points

    179

    0

    Posted July 2nd, 2012 14:00

    Roger,

     

    The solution can vary.

     

    Are you using the wireless adapter in the printer?

     

    It could be the settings in the wrieless router, also. What type of security? What channel?

     

     

    Try these tweaks...

    Start, control panel, device manager.

    Go to the USB Controller section and click the + sign.

    Go to each USB Root Hub and right click on it, left click properties, left click power management. Uncheck the box, allow computer to turn off this device to save power.

    Restart your computer.

    --------------------------------------

    Start, control panel, device manager. Click on Network and then right click on your wireless adapter, left click properties, power management. Uncheck the box, allow computer to turn off this device to save power.

     

     

    Rick

  • 179

    0

    Posted July 2nd, 2012 17:00

    Hi Rick,

    Thanks for your response.  

    Yes, I am using the wireless adapter in the printer.  I set it up using the USB cable connected to my laptop and the setup CD.  I entered all the settings for my network and it connected fine.  It is only after it sits, hibernating for a day, two, three, whatever between print jobs that when I go to print, it just sits there unresponsive.  Then I get the error pop-up from the Dell software saying there is a communications error, cannot connect to printer.

    If I unplug the printer and plug it back in, it reconnects to my wireless network and I can print again, for a few hours or so.  Even if it hibernates I can send a print job and it will wake up and print.  

    So I really think it has to do with my router settings.  Has anyone set up their printer in their router so that it always wakes up when you send a job across the network?  If so, how is that done?

    Thanks again!

    Roger

  • PudgyOne

    11 Legend

    •

    30315 Posts

    •

    106638 Points

    179

    0

    Posted July 2nd, 2012 17:00

    Roger,

     

    Make and model of your wireless router and the type of secutity is helpful. What channel?

     

    Try using these Recommended Wireless Router Settings I use channel 11. I owuld make a new SSID to make connecting easier. The printer will need setup like you did when it was new.

     

    What virus program are you using?>

     

     

    Rick

     

  • 179

    0

    Posted July 2nd, 2012 20:00

    Thanks again!

    Moto SBG6580

    firmware: 3.3.1.0-GA-11-070-NOSH

    AES security

    Changed to channel 11 at your suggestion (was "auto", so we'll see if that helps)

    I use Norton on  one machine and COMODO on another

    Roger

  • PudgyOne

    11 Legend

    •

    30315 Posts

    •

    106638 Points

    179

    0

    Posted July 3rd, 2012 03:00