I have a 1600n that is only a few months old. I noticed that there is some serious smearing on the underside of the flatbed scanner glass. This seriously decreases the scan quality. It is pretty much unusable for graphics.
How is it possible to clean the underside of the glass? I don't see any way to get access to that side. I noticed a few other unanswered threads on this topic.. is this a inherent problem with the 1600n?
I spent a long time with support on this.
Mine came like this. I suspect that a lot of them did.
I also suspect that if you order a replacement it will have it also.
They claim there is no way to clean it.
It doesn't seem to effect my copies or color scans, but I'll bet it would
if I used a calibration sheet.
I would suggest you have it replaced under warrenty before it causes problems.
I'm going to but not right away since I need the printer to be in service
until school is out.
Interesting.
It didn't seem like there was a way to get to the underside of that thing, at least without taking most of it apart.
The problem currently doesn't bother me when using the document feed scanner, however the flatbed is pretty much useless for pictures, photos, or anything of that nature.
I really don't want to have to deal with the hassle of shipping the thing back and tech support, I have no time for that. I may just deal with the fact that I have no useful flatbed.
Well, good to know I am not the only one. I am on my second 1600n. I had the first one replaced for the problem you described. They gave the impression they had never heard of this happening. The replacement has developed the same problem. I think I am going to return mine for a refund.
THIS IS CLEARLY A DESIGN OR MAUFACTURING DEFECT and DELL OUGHT TO BE AWARE OF IT AT THIS POINT.
The interesting part of it is that my glass started clean and developed this film as the printer was used. The film is coming from something inside printer itself. I don't think it is becuase the glass was not cleaned prior to install.
Yup.. that is pretty much what I see on my scanner. The only difference is that mine looks like it is "streaked".. almost like someone tried to wipe it down and it left marks.
You know, now that I think of it... I think that is what happened to mine too. I don't remember seeing this haze on the glass when I first used it. I only noticed it a few weeks ago after having the thing for a few months.
Could be some kind of lubricant that finds its way up into that area. Almost the same way that superglue vapor will stick to fingerprints left on just about anything.
I guess the question to ask now is how many other people have this problem, and what exactly has Dell said about it so far.
Given the bulk of this thing I really don't want to be bothered shipping it back to Dell on my dime to get a replacement.
If anybody knows how to demonstrate degradation please post this information.
Particularly if you can describe the process for showing that the scanner does not
meet specifications.
My printer is getting more cloudy everyday. For dell to contend that this does not degrade the quality of scans seems to fly in the face of physics. If light is being scattered enough to be readily apparent to the naked eye, I'm sure it is scattering it enough to effect the scan. I'll wager that this film distorts the image sufficiently to reduce the actual scan resolution to levels below that stated. That would be misrepresentation and remedies for this are provided by statutory laws and have significant precedence under civil law.
By now Dell must be aware that the 1600 MFP has a design/manufacturing defect. The underside of the scanner glass gets coated with some sort of film/residue that comes from inside the scanner itself.
The CSR I have been delaing with - who shall remain nameless - has refused to answer my question as to whether it is Dell's OFFICIAL position that no defect exists. He will only state that HE has not seen that the film causes any degredation in scan quality. I sent him one scan and he said he could not see where it was degraded. He asked me to send him scans with more colors in them.
He also would not address my request to explain the inconsistency between Dell's statements in the user manuals that say that the TOP of the glass must be kept clean to ensure high quality scans but at the same time Dell claims that a film on the underside of the glass has no effect on scan quality. Huh? What?
I certainly can provide a file which shows the degradation.
The only reason why I even mentioned this problem in a post on here is if it caused me a problem. I was able to take a scan and I definitely found the marks on the photo corresponding with the marks on the glass. The performance was certainly not acceptable considering what I paid for this unit (and a useable flatbed scanner goes for only 50 bucks these days).
I am a little busy right now (wife just gave birth to our 1st child.. so this isn't really a priority at the moment).. but when I get a chance I will try to get some scans together and post some more info on here.
I wonder if anyone can try to take a picture of the flatbed glass to see the haze. May have to play with the flash settings to get it just right. Again.. something I will try in a few days.
spam1
11 Posts
1019
0
Posted March 24th, 2005 14:00
Mine came like this. I suspect that a lot of them did.
I also suspect that if you order a replacement it will have it also.
They claim there is no way to clean it.
It doesn't seem to effect my copies or color scans, but I'll bet it would
if I used a calibration sheet.
I would suggest you have it replaced under warrenty before it causes problems.
I'm going to but not right away since I need the printer to be in service
until school is out.