UNSOLVED

jmark1

updated

20 years ago

J

jmark1

6 Posts

0

29477

May 2nd, 2007 19:00

Reseting Dell 715n to factory defaults

Is there anyway to reset the Dell 715n to factory defaults?  I do not know what the system was possibly renamed to.  I don't know it's static IP address or range.  I don't even know it's administrative user name or password. 
 
Any ideas. 
  • Storagetalk

    221 Posts

    640

    0

    Posted May 3rd, 2007 11:00

    You'll need the system reinstall/resource CD the unit came with.  They're not downloadable if you're wondering.
     
    Just follow the directions in the admin guide to reimage and you're back to day one.
  • jmark1

    6 Posts

    640

    0

    Posted May 3rd, 2007 17:00

    I have the CDs and I am following the directions that I found online.  If I put the NAS on the network the Kickstart application wants to know the IP range to search for.  The system has a static IP already, which I do not know what it is, and therefore I can't use the network option.  So, I tried to connect via serial port, but then you need to know a user name and password to connect, in which I don't know what it was previously used because those who built the NAS have left the organization at least 3 to 5 years ago.  Stinks, I know.  I was thinking if I pulled the CMOS battery would that reset the bios? 
     
     
  • ukcatsfo

    6 Posts

    640

    0

    Posted May 7th, 2007 09:00

    Have you yet discovered the fix for this problem?  I posted a similar thread on here last month, but got no useful information.
     
    I still have a 715N I cannot access at all, because of most of the same reasons you cannot.
  • jmark1

    6 Posts

    640

    0

    Posted May 7th, 2007 12:00

    Nope, nothing so far was useful.  However, I did have an idea.  What if you removed one drive from the array, add it to a PC, load an OS and IP, etc, then put it back in the array  We should be able to access it then.  Thoughts?
  • ecopoxy

    9 Posts

    640

    0

    Posted May 9th, 2007 02:00

    I'm trying to do the same thing because I can't get past the F2 (or ESC F2) during the boot up using a W2K client.  I can get to the setup menu using Ctrl S but that does not help.
     
     When I put W2K3 Server onto drive 0 configure it for my network, allow remote access remove and install into the PV715 and reboot,  all that happens is the system tries to boot but can't seem to find the OS. 
     
    There is a post by Fox3n that talks about using Ghost, but when I tried that, Ghost does not recognise the PV715REC.NAS as a valid Ghost image file.  Even changing the extension does not help.
     
    These appear to be good machines, but a pain to try and reinstall.
  • jmark1

    6 Posts

    640

    0

    Posted May 9th, 2007 12:00

    So you have  been able to get the kickstart to recognize the NAS?  I just want connect to the box via kickstart (with any OS).  After that I can reimage it using the original CDs. 
  • ecopoxy

    9 Posts

    640

    0

    Posted May 11th, 2007 05:00

    I have the original disks for V1.1...where are you located?
  • 519

    0

    Posted May 11th, 2007 05:00

    hi ecopoxy,
     
    im located @ Malaysia, what abt you?
     
  • ecopoxy

    9 Posts

    640

    0

    Posted May 11th, 2007 05:00

    I had a few problems getting Hyperterminal to work before i did an upgrade to HTPE6.3.  At the moment, I have got to the point where the PV715 is supposidly reinstalling itself, but it does not seem to have accessed the CD Share to get the software.  It has been sitting there now for about an hour...
  • 640

    0

    Posted May 11th, 2007 05:00

    Hi,
     
    Im also having the same issue, the previous guy left, No cd's, no documentation, no nothing! anyway how i can get a copy of those precious resource cd's???
     
    i have a 715N V 1.1 sitting right in front of me and right now its nothing more than a piece of excess metal!
     
    Thanks