Replacing a faulty Raid controller Powervault MD3620i
Hi.
We have an issue with RAID Controller 0 on our MD3620i.
It has status failed with service action (removal) allowed: yes.
Question: What is the best prosedure for replacing this RAID controller with a refurbished one?
Does the replacement RAID controller need to be wiped clean of any settings? In the Recovery Guru procedure it is mentioned that we can release the faulty Raid controller, take it out and wait 1 minute. Then we put the refurbished one back in and configure this as online. What about the existing settings and the storage disks? What is the best prosedure to keep all settings?
We also have an MD3600i Storage Array with similar controller. Is it possible to wipe one of the controllers in this and instead use it in our MD3620i Storage Array?
We have replaced the faulty RAID controller with a refurbished one wiping all data from the refurbished one before the change of controllers.
But when we boot the replacement controller has exact same fault as the one we replaced.
On the back of the controller the iSCSI ports shows activity with orange and green leds lit. The network interface port shows no activity (no lights)
Status LEDS on the Controller is Grenn for power. Orange for warning. Blue for service mode, green for circle with arrow and finally orange for battery. All of theese leds are lit.
The running controller 1 (the bottom controller) is on very old firmware 07.80.41.60 (12 years old), we are up to 08.20.24.60,and it keeps kicking the replacement controller 0 offline.
It may be best to contact support and set up a service case with a Pay as you need(PAYN) contract ifit is available to you so that an Engineer can do a remote session and work on this with you.
If you can get a 2GB controller with old firmware (07.xx.xx.xx) you may be able to get the controller to stay on if they are closer in firmware.
I'll have some steps you can try as best effort to send out probably tomorrow.
If possible you may try to backup and critical data.
DELL-Charles R
Social Media and Communities Professional Dell Technologies | Enterprise Support Services #IWork4Dell
Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!
DELL-Charles R
Moderator
•
4730 Posts
•
25476 Points
913
1
Posted May 6th, 2022 06:00
Hello vide123,
Best POA (plan of action)
POA to update firmware to attempt to correct common issues
Preparatory work
When you have the maintenance window,
DELL-Charles R
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!