Poweredge t110 ii server . i received the server without the battery , yesterday the electricity stopped for along of time and the system failed to open or boot the previous installed Ubuntu( with raid 5) . i want to know if there is a relation between the missing battery and the system fall . If there is no relation could you please tell me other things that may cause system fall ?? (NOTE : we are using UPS last for 30 minutes)
i also want to know a solution to reset the RAID to the default configuration because when i tried to re-install Ubuntu the installation failed to see the other 3 hard disks and show only one !!
Well, yes, you can re-enable the S100, but just know that the S100 is a WINDOWS-ONLY controller. Boot to BIOS Setup (F2), SATA Settings, set Embedded SATA to RAID.
You should plan to get a battery ... they cost like $3. Normally, the absence of a battery would not cause the system to fail, but if the server ever got unplugged or lost power, then all the BIOS settings would be reset to default. So, if you had Embedded SATA set to ATA, for example, and you lost power, the system would have reverted to AHCI ... THAT could cause the OS to fail to boot due to driver-related settings.
If you don't believe this caused your system to fail, then you need to provide more details, as I can't answer that with what little information has been provided.
When you say the system failed, what do you mean? Are you talking about hardware failure or software/OS failure? Did the server itself stop responding/booting/etc., or did the OS stop booting, giving errors, etc.
So, are you running a linux-managed software RAID, or are you running a hardware RAID configuration? What controller are the drives physically connected to? Onboard SATA or add-in card? If a card, which one?
If you want to know how to "reset the RAID to the default configuration" of a linux software RAID, then you will need someone better versed in linux RAID than me ... this is not a function of the hardware.
Default value for Embedded SATA is AHCI, so if your BIOS settings were reseat to defaults (power outage with no battery, etc.), and you had been running in ANY other mode, then the OS would not boot properly. Settings for the Embedded SATA are Off (which would render onboard SATA ports useless), ATA, AHCI (default), and RAID (S100).
"may be the battery is a reason but i closed the server a lot of time and re-open it with no problem :/ :/ "
theflash1932
11 Legend
•
16255 Posts
798
1
Posted May 22nd, 2013 10:00
Well, yes, you can re-enable the S100, but just know that the S100 is a WINDOWS-ONLY controller. Boot to BIOS Setup (F2), SATA Settings, set Embedded SATA to RAID.
You should plan to get a battery ... they cost like $3. Normally, the absence of a battery would not cause the system to fail, but if the server ever got unplugged or lost power, then all the BIOS settings would be reset to default. So, if you had Embedded SATA set to ATA, for example, and you lost power, the system would have reverted to AHCI ... THAT could cause the OS to fail to boot due to driver-related settings.
If you don't believe this caused your system to fail, then you need to provide more details, as I can't answer that with what little information has been provided.
When you say the system failed, what do you mean? Are you talking about hardware failure or software/OS failure? Did the server itself stop responding/booting/etc., or did the OS stop booting, giving errors, etc.